Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 219 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Anigrand Craftswork ANIG5001
1:144 NPO Energia Rocket. In 1974, after failure of the N-1 Lunar rocket, the Soviet military preferred a new family of modular following the loss of space race to America. In 1976, the Ministers of the USSR launched the program of the reusable spacecraft system. The former OKB-1 bureau was restructured to NPO Energia enterprise that in charge of the program development. The U.S. shuttle design was studied by Soviet rocket scientist... Space kits (resin) Catalogue £97.99 Out of Stock
0
Anigrand Craftswork ANIG2020
1:72 Republic XF-103. In 1949, U.S. Air Force introduced the new 'weapons system' concept, in which consisting of the air-to-air guided missiles, fire control system and the '1954 interceptor' capable of supersonic flight. The project was designed to intercept the new Soviet intercontinental bombers. In 1951, Air Force announced that the Convair's YF-102Aand the Republic's XF-103 were selected for the airframe part of the project. ... Aircraft kits (resin) Catalogue £57.99 Out of Stock
0
Anigrand Craftswork ANIG2018
1:72 North-American XF-108 Rapier Mach 3 escort fighter for XB-70. In 1955, USAF launched the program of LRIX (Long-Range Interceptor Experiment), that the fighter was to be capable of March 3 performance and could destroy attacking Soviet bombers over the poles before they could get near U.S. territory. As it was also to be the escort fighter for the XB-70 bomber that was built by North-American Aviation, the company also was issu... Aircraft kits (resin) Catalogue £57.99 Out of Stock
0
Anigrand Craftswork ANIG2031
1:72 Douglas XB-42 Mix-Master. In 1943, the Douglas began a company funded study to a high speed bomber design which was not liked the traditional wing mounting engines. It was an unusual idea to install the two engines within the fuselage driving a pair of propellers mounted at the tail. That can leaving the wing and fuselage clean and free of aerodynamics-reducing protrusions. Douglas submitted an unsolicited proposal to U.S.A.A.... Aircraft kits (resin) Catalogue £57.99 Out of Stock
0
Anigrand Craftswork ANIG2041
1:72 Hughes XF-11. In 1939, Hughes Aircraft used a special wooden structure which strength comparable to steel for a proposal of bomber design, the model D-2. The project interested USAAF because metal material was becoming a scare by the war. In 1942, the D-2 was ordered under an attack aircraft designation XA-37. Later it was considered as a night fighter XP-73. In 1943, the wooden D-2 prototype was lost by fire accident in Hughe... Aircraft kits (resin) Catalogue £67.99 Out of Stock
0
Anigrand Craftswork ANIG2056
1:72 McDonnell XP-67 Moonbat. In 1939, USAAF issued a specification 'R-40' for a long-range twin-engine fighter. McDonnell submitted company's first design but was rejected. McDonnell modified the design and resubmitted to USAAF in 1941. This time it was accepted and received order for two prototypes, designated XP-67. The XP-67 was created an unusual looking that the fuselage and the engine nacelles were merged together in order t... Aircraft kits (resin) Catalogue £47.99 Out of Stock
0
Anigrand Craftswork ANIG2057
1:72 Republic XF-12 Rainbow. In 1943, USAAF confronted with the problem of photographic information which collecting from the Pacific theatre while U.S. did not had close airfield in Pacific to be able to use photo-reconnaissance aircraft. So USAAF issued a request for a new long-range / high altitude reconnaissance airplane. In March 1944, Republic proposed to modify its civil model, RC-2 to install with the photographic equipment... Aircraft kits (resin) Catalogue £97.99 Out of Stock
0
Anigrand Craftswork ANIG2062
1:72 Platt Le Page XR-1 first U.S.Army helicopter. Aircraft History and Specification. In 1937, two engineers, Laurence LePage and Haviland Platt, traveled to Germany to view the Focke FA-61 tandem-rotor helicopter. There they obtained an option to build the Focke helicopter in U.S., but deteriorating conditions between two governments prevented the deal from going through. After returning to the U.S., they formed Platt LePage Airc... Aircraft kits (resin) Catalogue £37.99 Out of Stock
0
Anigrand Craftswork ANIG4014
1:144 Alexejev Lun Ekranoplan. Also includes BONUS kits of the Yakovlev Yak-36 Freehand, Yakovlev Yak-38 Forger and Yakovlev Yak-141 Freestyle. In the early 1960s, the Soviet Navy command was urgently needed a fast military transport capable of carrying a large payload on the shore of Caspian Sea and Black Sea. The Minister of Defense recognized a Wing-In-Ground effect vehicle which basically allowed for a greater weight aircraft to... Aircraft kits (resin) Catalogue £147.99 Out of Stock
0
Anigrand Craftswork ANIG2083
1:72 Consolidated B-32 Dominator. In 1939, the USAAF issued requirement for a Super bomber which could operate at high-speed, long-range, more bomb load and more defensive armament than the existing Boeing B-17 Flying Fortress and Consolidated B-24. In 1940, the Army issued contracts for preliminary design to four major aircraft companies, which were designated as Boeing XB-29, Lockheed XB-30, Douglas XB-31 and Consolidated XB-32. ... Aircraft kits (resin) Catalogue £117.99 Out of Stock
0
Anigrand Craftswork ANIG4051
1:144 Convair XP5Y-1 Tradewind Includes bonus kits of the Convair XF2Y-1 Sea Dart, Douglas F3D-2 Skyknight, Douglas XA2D-1 Skyshark. In 1944, the U.S. Navy asked the industries to enter a design competition for a 105,000 pound patrol boat powered by four radials. At the end of the war, two Blohm-und-Voss Bv.222 flying boats were captured by U.S. forces. Convair acquired one for evaluation at Naval Air Station, the intensive studies ... Aircraft kits (resin) Catalogue £87.99 Out of Stock
0
Anigrand Craftswork ANIG2097
1:72 Lockheed XST Have Blue. Stepping stone of the F-117A Nighthawk. In 1975, the USAF and DARPA initiated a XST program to study the concept of a very low observable military aircraft. DARPA penned the requirements for the ATA designs that was a small aircraft about the size of F-15. Northrop and Lockheed were asked to design a prototype. In early 1977, Lockheed won the contract for the construction of two 60-percent scale flyable... Aircraft kits (resin) Catalogue £47.99 Out of Stock
0
Anigrand Craftswork ANIG2104
1:72 Douglas C-133 Cargomaster Ballistic missiles carrier. Aircraft kits (resin) Catalogue £187.99 Out of Stock
0
Anigrand Craftswork ANIG2105
1:72 Yokosuka H5Y-1 Cherry IJN Type-99 flying boat. In 1934, the Imperial Japanese Navy issued requirement for a twin-engine maritime reconnaissance flying boat, which was intended to match the performance of contemporary four-engine flying boats, while being cheaper to build and easier to maintain. The 11th Naval Air Arsenal at Yokosuka was given the responsibility of design and building two prototypes, these being completed durin... Aircraft kits (resin) Catalogue £117.99 Out of Stock
0
Anigrand Craftswork ANIG9002
1:72 Boeing 747 VC-25A 'Air Force One' Aircraft kits (resin) Catalogue £327.99 Out of Stock
0
Anigrand Craftswork ANIG4091
1:144 Lockheed SR-91 Aurora (with bonus kits: Lockheed F-19A, Northrop X-49, U.S. Marine LHX Stingbat) Beginning in the mid-1980s, the U.S. Air Force and NASA have supported a number of studies of aircraft that are consistent with accounts of the "Aurora" reconnaissance aircraft project, the proposed successor to the SR-71 Blackbird which would retired in 1999. While various sources disclosed that Lockheed-Martin was developing a Ma... Aircraft kits (resin) Catalogue £87.99 Out of Stock
0
Anigrand Craftswork ANIG2044
1:72 Beech XA-38 Grizzly. In 1942, USAAF requested for a new heavy armored ground attack airplane as a replacement of the Douglas A-20 Havoc. Beech Aircraft Corp had already started work on the design of the Model 28 "Destroyer' which specification met to the requirement. So a contract was awarded to Beech for two prototypes that designated XA-38 and re-named 'Grizzly' with competition in Hughes XA-37 (later changed to XF-11). For ... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2002
1:72 Bell X-22 Tilting ducts VTOL experiment. During early 1950s, Bell Aircraft began studying conventional propeller and jet design. In 1957, Bell signed contract from Navy for design of ducted propeller assault transport with VTOL capability. This study also caught attention of the Air Force, Marine Corp and Army, and joined for study during 1959. In 1962, Bell and Navy signed contract for the new test-bed, designated X-22. Its d... Aircraft kits (resin) Catalogue £37.99 - In Stock
1
Anigrand Craftswork ANIG2008
1:72 Doak VZ-4DA Archaeopteryx of tilt-ducts VTOL. The Doak Model 16 was the first aircraft to demonstrate the tilt duct concept. In 1956, U.S. Army ordered a prototype, indicated VZ-4DA. The configuration was the tilting duct blower where located at each wing tip, pointing vertical for take off and landing, and rotated to the horizontal for forward flight. Engine exhaust was deflected at the fuselage rear for pitch control. To lim... Aircraft kits (resin) Catalogue £34.99 - In Stock
1
Anigrand Craftswork ANIG2009
1:72 General-Dynamics A-12 Avenger II Naval stealth attacker project. In mid-1980's, U.S. Navy awarded the ATA (Advanced Tactical Aircraft) program as a replacement for the Grumman A-6 Intruder. The key improvement over the existing aircraft was stealth ability. In 1988, General-Dynamics / McDonnell-Douglas were selected to develop a subsonic twin jet carrier- based ATA for attack at night or in bad weather, the A-12 Avenger II. Th... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2049
1:72 Convair XP-81 In 1943, USAAF issued a specification for a long-range jet powered fighter which could be flight across the Pacific to escort bombers to Japan. Consolidated Vultee Aircraft (Convair) responded with the new design which was powered by a combination of the turboprop and jet engine units, while Navy was also working on the same theory with the Curtiss XF15C-1 and the Ryan FR-1. The configuration was a nose mounted t... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2021
1:72 Northrop YA-9A. In 1970s, U.S. Air Force launched the A-X requirement that a new designed ground-attack aircraft could provided stable platform for bombing accuracy over the battlefield area. It was also required to be durable for flight close to the ground, in range of enemy guns. The under-wing pylons could carry almost all arms in Air Force inventory. Northrop submitted the YA-9A to the Air Force in competition with the Fai... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2026
1:72 Rockwell International XFV-12A U.S. Navy VTOL fighter. In 1972, U.S. Navy issued a request for the proposals of the next generation V/STOL close-support fighter on alternate the McDonnell-Douglas AV-8A. It was requested with supersonic speed capability, and enables to operate from small ships. Rockwell International responded with the 'thrust-augmented wing' design. This concept led to Navy's interest and was fully funded for ... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2016
1:72 XF-109 Tilting jets VTOL supersonic fighter. In 1953, Bell Aircraft Corp developed a VTOL research aircraft, the Model 65 ATV that a pair of turbojets were mounted one each side of the fuselage and could rotated at the aircraft center. The ATV program ended in 1955 and gave Bell experience of the VTOL jet flight, that also led to U.S. Air Force and Navy sponsorship of the project D-188A tilting jets fighter, designated USAF's ... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2025
1:72 Arado Ar-E.581-4. In 1943, Arado began work on series of the Ar E.555 flying wing bomber project. This flying wing configuration was thought to be the best design to fulfill a requirement of high speed, heavy loading and long-range aviation. Due to the design acceptance by the Reichsluftfahrt Ministerium (State Ministry for Aviation) in early 1944, the Arado design team scaled down the same configuration to design a smaller si... Aircraft kits (resin) Catalogue £24.99 - In Stock
1