Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 221 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Anigrand Craftswork ANIG4101
1:144 Northrop YRB-49A (includes these BONUS kits Hughes XV-9A Hot cycle, MSU XV-11A Marvel and Ryan VZ-3RY) n June 1948, after the flight test of the YB-49 was proved, the U.S. Air Force ordered the type into full production as the RB-49A reconnaissance aircraft. It was powered by six jet engines, two of them externally mounted in under-wing pods, ruining the aircraft's sleek, aerodynamic lines, but extending its range by carrying ... Aircraft kits (resin) Catalogue £87.99 - In Stock
5
Anigrand Craftswork ANIG2039
1:72 North-American YF-93A. In 1946, USAF recognized all the early jet fighters were lacked sufficient range to escort bombers to the target. So the proposal for a penetration fighter were requested. In 1947, North-American responded with the proposal for a revised version of North-American F-86A, which the fuselage size was enlarged for bigger internal fuel tanks to increase its range. The extra fuel increased weight so the more p... Aircraft kits (resin) Catalogue £47.99 - In Stock
3
Anigrand Craftswork ANIG2077
1:72 Boeing X-20 Dyna Soar. In 1945, millions of German military documents were confiscated by USAAF. One of the concept was the Sanger aerospace bomber. During post-war years, Bell was selected for the study on space-craft, and named BoMi. In 1956, the Air Force channeled Bell's development to a reconnaissance, bombardment vehicle. A competition for a glider prototype was opened. In 1959, Boeing won the competition, and was contra... Aircraft kits (resin) Catalogue £47.99 - In Stock
3
Anigrand Craftswork ANIG5002
1:144 Molniya Buran OK-1.01 space shuttle. In 1974, after failure of the N-1 Lunar rocket, the Soviet military preferred a new family of modular following the loss of space race to America. In 1976, the Ministers of the USSR launched the program of the reusable spacecraft system. The former OKB-1 bureau was restructured to NPO Energia enterprise that in charge of the program development. The U.S. shuttle design was studied by Soviet... Space kits (resin) Catalogue £77.99 - In Stock
3
Anigrand Craftswork ANIG5003
1:144 Molniya Buran OK-GLI space shuttle. In 1974, after failure of the N-1 Lunar rocket, the Soviet military preferred a new family of modular following the loss of space race to America. In 1976, the Ministers of the USSR launched the program of the reusable spacecraft system. The former OKB-1 bureau was restructured to NPO Energia enterprise that in charge of the program development. The U.S. shuttle design was studied by Soviet ... Space kits (resin) Catalogue £77.99 - In Stock
3
Anigrand Craftswork ANIG2087
1:72 Handley-Page HP.115. In the late 1950s, the United Kingdom, France, United States and Soviet Union were considering developing supersonic transport. BAC was largely funded by British government on the design called the Type 223. The T.223 was a thin-winged delta shape aircraft but the cost for starting construction was so high. British government required BAC to proceed with small-scale delta wing prototype testing before any ... Aircraft kits (resin) Catalogue £47.99 - In Stock
3
Anigrand Craftswork ANIG2138
1:72 BAE Tempest II RAF fifth generation fighter project. In 2018, U.K. Ministry of Defense has unveiled the Tempest II model at the Farnborough show, new plans for a new stealth fighter jet. Tempest II is a proposed stealth fighter aircraft concept to be designed and manufactured in the United Kingdom for the Royal Air Force. It is being developed by a consortium known as "Team Tempest," consisting of the UK Ministry of Defence, B... Aircraft kits (resin) Catalogue £97.99 - In Stock
3
Anigrand Craftswork ANIG2058
1:72 McDonnell XF-88A Voodoo. In 1945, USAAF recognized all the early jet fighters lacked sufficient range to escort bombers to the target. So proposals for a penetration fighter were requested. In 1947, McDonnell submitted its larger-sized McDonnell F2H proposal, and was chosen for two prototypes, designated XF-88 Voodoo. The other designs entered the competition were the Lockheed XF-90 and the North-American YF-93A. In 1948, the ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2046
1:72 Convair XB-46. In 1944, with the success of the German jet bomber Ar-234, U.S. war department was aware of aviation advance in the enemy. So a requirement for a new design of the jet bomber which tactical radius could cover 1000-miles was issued. Convair (Consolidated Vultee Aircraft) submitted the Model 109 mockup. It was approved and awarded contract for three prototypes which designated XB-46. Other designs in the competiti... Aircraft kits (resin) Catalogue £87.99 - In Stock
2
Anigrand Craftswork ANIG2001
1:72 Lippisch Li.P.13B Luft '46 Ramjet concept. In 1944, Germany started to face the fuel shortage problem. Dr. Alexander Lippisch and his design team had proceeding with the P.13a design in Austria and he though to try 'coal' to be a new kind of fuel for his ramjet fighter concepts. A hexagonal shape combustion chamber was selected for coal filling from a center top but it was no way to fit into the P.13a fuselage. So the differen... Aircraft kits (resin) Catalogue £24.99 - In Stock
2
Anigrand Craftswork ANIG2002
1:72 Bell X-22 Tilting ducts VTOL experiment. During early 1950s, Bell Aircraft began studying conventional propeller and jet design. In 1957, Bell signed contract from Navy for design of ducted propeller assault transport with VTOL capability. This study also caught attention of the Air Force, Marine Corp and Army, and joined for study during 1959. In 1962, Bell and Navy signed contract for the new test-bed, designated X-22. Its d... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2005
1:72 Curtiss-Wright X-19 Tilt-propellers VTOL experiment. In 1958, Curtiss-Wright started the four passengers VTOL commercial aircraft program without any government support. It was designed with a tilting propeller at each wing tip that a nacelle could rotate in pointing vertical for take off and landing and pointing horizontal for cruise. When the two prototypes were almost completed, Curtiss-Wright decided to offer these two air... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2049
1:72 Convair XP-81 In 1943, USAAF issued a specification for a long-range jet powered fighter which could be flight across the Pacific to escort bombers to Japan. Consolidated Vultee Aircraft (Convair) responded with the new design which was powered by a combination of the turboprop and jet engine units, while Navy was also working on the same theory with the Curtiss XF15C-1 and the Ryan FR-1. The configuration was a nose mounted t... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2048
1:72 Douglas XA2D-1 Skyshark. In June 1945, with the success of the high performance AD Skyraider, Navy asked Douglas to design a new version of the AD with turboprop power, and selected Allison to design the power-plant. Allison proposed to install a pair of nose mounted engines to drive a pair of contra-rotating propellers. In cruise flight, one of the engine and prop could be shut down to increase its flight range. In 1947, two ... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2021
1:72 Northrop YA-9A. In 1970s, U.S. Air Force launched the A-X requirement that a new designed ground-attack aircraft could provided stable platform for bombing accuracy over the battlefield area. It was also required to be durable for flight close to the ground, in range of enemy guns. The under-wing pylons could carry almost all arms in Air Force inventory. Northrop submitted the YA-9A to the Air Force in competition with the Fai... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2020
1:72 Republic XF-103. In 1949, U.S. Air Force introduced the new 'weapons system' concept, in which consisting of the air-to-air guided missiles, fire control system and the '1954 interceptor' capable of supersonic flight. The project was designed to intercept the new Soviet intercontinental bombers. In 1951, Air Force announced that the Convair's YF-102Aand the Republic's XF-103 were selected for the airframe part of the project. ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2059
1:72 Republic XF-84H Thunderscreech. In 1950, Wright Air Development Center of the U.S.A.F. had worked with Curtiss and Hamilton to study the concept of new propeller which could approach supersonic speed to a piston-engine fighter. The engineers of the WADC needed a suitable airframe to test the concept, they selected most powerful Allison turboprop engine at the time, and chose to modify the F-84F for this new role. The concept a... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2029
1:72 Vought XF8U-3 Crusader III. In 1955, with the success of the F8U-1 and -2, Vought started to conceive a more powerful fighter design, the XF8U-3. Although it was similar to the F8Us and carried F8 designation, the aircraft was entirely a new design that installed larger fuselage to accommodate the new powerful J75 engine. The U.S. Navy was interested in the design and signed contract to Vought for five prototypes in competitio... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2016
1:72 XF-109 Tilting jets VTOL supersonic fighter. In 1953, Bell Aircraft Corp developed a VTOL research aircraft, the Model 65 ATV that a pair of turbojets were mounted one each side of the fuselage and could rotated at the aircraft center. The ATV program ended in 1955 and gave Bell experience of the VTOL jet flight, that also led to U.S. Air Force and Navy sponsorship of the project D-188A tilting jets fighter, designated USAF's ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2011
1:72 Hiller X-18 Tilt-wing VTOL cargo transport experiment. During early 1955, Hiller Aircraft designed a large, tilt-wing VTOL aircraft as an in-house study. In 1956, U.S. Air Force interested this concept and assigned contract to Hiller for the development of a VTOL cargo transport. The test bed was designated X-18. In order to speed the construction process and to conserve available Air Force funding, the X-18 was built from exi... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2022
1:72 Sikorsky S-67 In 1964, U.S. Army lunched the AAFSS specification, that calling for an aircraft with a high-speed cruising and long-time hovering capability. Sikorsky submitted the S-66 pusher tail rotor project that competitor with Lockheed AH-56 Cheyenne. The AH-56 won the contest but failed to meet the expectations. For intended to replace the AH-56, Sikorsky self-venture developed a simplified AAFSS that used a number of ex... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2023
1:72 Northrop YF-17 Cobra. In 1965, Northrop began a fighter project, P-530 with a new concept, a pair of Leading Edge Root Extension (LERX) for the main wings that tapered into the fuselage for exceeding attack angles. The shape of LERX looks like a cobra head so it was named Cobra. In 1972, USAF launched the Lightweight Fighter program that called for a small, lightweight, low cost, air superiority day fighter designed for a high... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2031
1:72 Douglas XB-42 Mix-Master. In 1943, the Douglas began a company funded study to a high speed bomber design which was not liked the traditional wing mounting engines. It was an unusual idea to install the two engines within the fuselage driving a pair of propellers mounted at the tail. That can leaving the wing and fuselage clean and free of aerodynamics-reducing protrusions. Douglas submitted an unsolicited proposal to U.S.A.A.... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2041
1:72 Hughes XF-11. In 1939, Hughes Aircraft used a special wooden structure which strength comparable to steel for a proposal of bomber design, the model D-2. The project interested USAAF because metal material was becoming a scare by the war. In 1942, the D-2 was ordered under an attack aircraft designation XA-37. Later it was considered as a night fighter XP-73. In 1943, the wooden D-2 prototype was lost by fire accident in Hughe... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2042
1:72 Blohm-und-Voss FG.227 flying boat/seaplane. In 1941, after success of the giant BV.222, Blohm-und-Voss was commissioned to design a larger and more capable flying boat, the BV.238. As it was the largest flying boat ever constructed at that time, Blohm-und-Voss engineers could not determined its aerodynamic and hydrodynamic abilities. In order to avoid the risks taken with a full sized BV.238 prototype, it was decided to constr... Aircraft kits (resin) Catalogue £37.99 - In Stock
2