Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 73 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Flying Leathernecks FL32-2017
1:32 GBU-38 500lb JDAM Non-thermally protected Set includes two slick Mark 82/BLU-111 bombs, two KMU-572 kits, which include the tail assemblies and nose strake as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D printed Catalogue £14.99 - In Stock
5+
Flying Leathernecks FL32-2020
1:32 Mark 82 / BLU-111 500lb bomb with BSU-33 fin - Thermally Protected This set includes six Mark 82/BLU-111 bomb bodies with the thermal protective coating, six BSU-33 tail fins, and six each of the following : M904 nose fuzes, Mk-43 TDD, MXU-735 nose plugs. Accurately reproduced using personal measurements and photos of the real item. Parts come as seen in the photo, leaving minimal work for the modeler. Produced with the ... 3D printed Catalogue £19.99 - In Stock
5+
Flying Leathernecks FL32-2022
1:32 Mark 83 Thermally Protected 1000lb bomb with Conical Fin. This set includes two (2) Mark 83 1000lb bombs with the Thermal Protective coating, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mark 83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. 3D printed Catalogue £14.99 - In Stock
5+
Flying Leathernecks FL32-2024
1:32 GBU-32 1000lb JDAM - Thermally Protected 3D Resin 3D printed Catalogue £14.99 - In Stock
5+
Flying Leathernecks FL32-2033
1:32 AN/ALE-39 Chaff/Flare buckets with flange 3D Resin 6 buckets 3D printed Catalogue £7.99 - In Stock
5
Flying Leathernecks FL32-2036
1:32 LAU-7/A Missile Launcher for USN/USMC 1958 - 1968 3D printed Catalogue £11.99 - In Stock
2
Flying Leathernecks FL32-2037
1:32 LAU-7/A-1, /A-2, /A-3 for USN/USMC 1969-1975 3D printed Catalogue £11.99 - In Stock
5
Flying Leathernecks FL32-2038
1:32 LAU-7/A-4, /A-5 Missile Launcher USN/USMC 1976-1987 3D printed Catalogue £11.99 - In Stock
2
Flying Leathernecks FL32-2039
1:32 LAU-7A/A Missile Launcher for USAF McDonnell F-4C/D/F-4E Phantom 1964-1975 3D printed Catalogue £11.99 - In Stock
5+
Flying Leathernecks FL32-2042
1:32 LAU-7/A-6 for USN/USMC 1988 - Present 3D printed Catalogue £11.99 - In Stock
4
Flying Leathernecks FL32-2043
1:32 LAU-7F/A Missile Launcher for USMC McDonnell-Douglas F/A-18C/D Hornet 2010 - Present 3D printed Catalogue £11.99 - In Stock
3
Flying Leathernecks FL35-5002
1:35 LAU-68F/A APKWS Pod (empty) 3D Resin 3D printed Catalogue £11.99 - In Stock
5+
Flying Leathernecks FL35-5004
1:35 AN/ALE-39 Chaff/Flare buckets with flange 3D Resin 6 buckets 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL35-5005
1:35 Detailed TSS Turret for Academy Bell AH-1Z 3D Resin (designed to be used with Academy kits) 3D printed Catalogue £7.99 - In Stock
2
No Image Flying Leathernecks FL35-5006
1:35 LAU-7/A-6 thru LAU-7C/A" 1988 to present day 3D Resin 4 Launchers 3D printed Catalogue £11.99 - In Stock
5+
Flying Leathernecks FL48-8000
1:48 F/A-18A/B/C/D HUD for BuNo's 161353 thru 163782. All NEW design HUD assembly (designed to be used with Hasegawa and Kinetic Model kits) Complete unit is 3D printed and comes ready to install after a small modification to the kit parts. Includes die cut 'glass' in .005 clear styrene 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL48-8001
1:48 McDonnell-Douglas AV-8B Harrier HUD (Head Up Display) This item is 3D printed and is ready to install. "Glass" cut in .005 clear styrene also included. Designed to fit the Hasegawa 1/48 AV-8B kits. (designed to be used with Hasegawa kits) 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL48-8003
1:48 Mark 83 1000lb bomb with Conical fin (2) This set includes two (2) Mark 83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mark 83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. 3D printed Catalogue £11.99 - In Stock
5+
Flying Leathernecks FL48-8009
1:48 Bell UH-1Y SATCOM Antenna. This is a two piece 3D printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter.(designed to be used with Kitty Hawk Model kits) Simply glue the antenna to the top center of the base, paint and attach to your model. Parts come ready to install with no clean up required. 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL48-8010
1:48 F/A-18A+/A++/C/D HUD for BuNo's 163985 thru 165532. All NEW design HUD assembly (designed to be used with Hasegawa and Kinetic Model kits) Complete unit is 3D printed and comes ready to install after a small modification to the kit parts. 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL48-8011
1:48 GBU-38 500lb JDAM Set includes two Mark 82/BLU-111 bombs with KMU-572 tail assemblies attached and the nose strake as a separate piece. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D printed Catalogue £9.99 - In Stock
5+
Flying Leathernecks FL48-8012
1:48 GBU-32 1000lb JDAM Set includes two Mark 83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D printed Catalogue £9.99 - In Stock
5+
Flying Leathernecks FL48-8013
1:48 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and F/A-18B. These pylons are correct for F/A-18A/B aircraft with BuNo's 161353 thru 163175. While the locating holes are designed to fit the Hasegawa series of F/A-18 kits, they will fit all other kits with little to no modification needed. They not only correct the shape of the kit pylons, they provide details unmatched... 3D printed Catalogue £19.99 - In Stock
3
Flying Leathernecks FL48-8014
1:48 contains four correct SUU-63A/A wing pylons and one correct SUU-62A/A centerline pylon for the F/A-18A+, A++, C and D. These pylons are correct for F/A-18A+ thru D aircraft with BuNo's 163427 thru 163782. While the locating holes are designed to fit the Hasegawa series of F/A-18 kits, they will fit all other kits with little to no modification needed. They not only correct the shape of the kit pylons, they provide detail... 3D printed Catalogue £19.99 - In Stock
4
Flying Leathernecks FL48-8015
1:48 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D. These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532 and aircraft upgraded to F/A-18A++ standard. The F/A-18A++ can be easily identified by the installation of the SJU-17 NACES ejection seat, IFF antenna on the nose, GPS dome and swept back upper and lower UHF/VHF antenna, while th... 3D printed Catalogue £19.99 - In Stock
5+