Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 73 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Barracuda Studios BCR32157
1:32 Messerschmitt Bf-109G-6 Upper Gun Cowling (Standard) - This set consists of one detailed, accurate upper cowling. This set improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell's Bf 109G-6 kit part. For non-Erla built Bf-109G-6s. A one piece, easy to install correction for the Revell kit. Pattern by Gunnar Jansson (deigned to be used with Revell kits) Aircraft detailing sets (resin) Catalogue £11.95 - In Stock
10+
Barracuda Studios BCR32158
1:32 Messerschmitt Bf-109G-6 Upper Gun Cowling (Erla) - This set consists of one detailed, accurate upper cowling specific to the Erla built 109G-5 and G-6 aircraft. The gun troughs are different on these Erla built machines. Erla upper cowlings have a rectangular panel line around them. This set also improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell's Bf 109G-6 kit part... Aircraft detailing sets (resin) Catalogue £11.99 - In Stock
10+
Barracuda Studios BCR32340
1:32 Supermarine Spitfire Mk.IXc Wing Correction (Revell) - This set contains a pair of new resin wing sections featuring accurate intake & exhaust ramps to replace the flat wing sections in the kit. Also included are new detailed radiator fairings and radiator faces to replace the less detailed kit parts. Clear, illustrated step by step instructions walk you through the installation. A real improvement for the Revell kit. Master p... Aircraft detailing sets (resin) Catalogue £14.99 - In Stock
10+
Barracuda Studios BCR32448
1:32 Messerschmitt Bf-109F/Bf-109G-6 Separate Control Surfaces - The set consists of new resin ailerons, elevators and standard rudder for the Revell kit. Why did we make them? The kit parts have nice fabric rib tape detail, but it is overstated, and the trailing edges are quite thick when assembled. It takes a good bit of careful sanding and shaping to thin the edges and make the fabric detail properly subtle. We have done it for ... Aircraft detailing sets (resin) Catalogue £13.99 - In Stock
10+
Barracuda Studios BCR32461
1:32 Supermarine Spitfire Mk.IXc Late (Aerovee) Carb Intake - Contains a new resin lower engine cowling w accurate, detailed, late style Aerovee carburetor intake to improve the simplified, inaccurate Revell Spitfire Mk IX parts. A quick and easy one-piece replacement. For the Revell Spit IX kit. Mastered by Roy Sutherland (designed to be used with Revell kits) Aircraft detailing sets (resin) Catalogue £11.99 - In Stock
10+
Barracuda Studios BCR48348
1:48 Hawker Sea Fury FB.11 Gearbay Set This set contains parts to assemble a complete, super detailed resin main landing gear bay to replace the somewhat basic kit gearbay in the Airfix. It has been designed to be installed with a minimum of thinning and modification to the kit wing. It also gives the impression of a thinner lower wing skin and deeper gearbay. May be possible to modify it to fit other kits. (designed to be used wit... Aircraft detailing sets (resin) Catalogue £14.99 - In Stock
10+
Barracuda Studios BCR48424
1:48 Hawker Tempest Mk.V Ailerons and Elevators. This set consists of detailed separate resin elevators and ailerons to replace the Eduard kit parts. The Eduard new tool Tempest kit tends to suffer from hard-to-fix shrink marks on the one piece solid molded ailerons and elevators. Filling and sanding them wipes out the very fine rivets and panel lines. Restoring them can be a lot of fussy work. This set makes short work of that. Fo... Aircraft detailing sets (resin) Catalogue £7.99 - In Stock
6
Barracuda Studios BCR48433
1:48 Focke-Wulf Fw-190A, Fw-190F, Fw-190D Cockpit Snapshot Upgrade A fast and easy upgrade for your Fw 190 cockpit. Just the best parts. New seat with naturally draped and super detailed molded-in seat harness (no fussing with etched belts), stick, rudder pedals, map case, throttle, canopy crank and two types of Revi gunsight make your cockpit "pop" with minimum work. Perfect for Wurger fans who want to build multiple versions... Aircraft detailing sets (resin) Catalogue £9.99 - In Stock
1
Barracuda Studios BCR32411
1:32 Avro Lancaster Mk.I/III WWII Radio Upgrade Set This set consists of a pair of accurate, super detailed British T1154 (transmitter) and R1155 (receiver) radios with separately molded knobs for ease of painting, and full stencil, placard and dial decals. Electrical connectors are also supplied along with full color, illustrated instruction that includes a wiring diagram. For your 1/32nd scale WWII era Lancaster or can be displa... Aircraft detailing sets (resin) Catalogue £9.99 - In Stock
1
Barracuda Studios BCR48349
1:48 Hawker Sea Fury FB.11 Engine Front and Spinner Set. This set consists of a new engine front with much improved detail, and a new correctly shaped spinner for the 1/48th Airfix Sea Fury. The kit spinner is too blunt. The parts are designed to be a drop fit replacement for the kit parts, though we highly recommend using this set in conjunction with our Sea Fury Cowling Upgrade Set BCR48350. An easy upgrade that will make your la... Aircraft detailing sets (resin) Catalogue £14.99 - In Stock
5
Barracuda Studios BCR32262
1:32 de Havilland Mosquito WWII Radio Upgrade Set. This set consists of a pair of accurate, super detailed British T1154 (transmitter) and R1155 (receiver) radios with separately molded knobs for ease of painting, and full stencil, placard and dial decals. Electrical connectors are also supplied along with full color, illustrated instruction that includes a wiring diagram. For your 1/32nd scale WWII era Mosquito or can be displayed... Aircraft detailing sets (resin) Catalogue £9.99 Out of Stock
0
Barracuda Studios BCR48399
1:48 Hawker Tempest Mk.V Corrected de Havilland Spinner. This set contains a new detailed de Havilland 4 blade spinner with smaller & accurately shaped blade openings to replace the kit spinner in the Series I and Series II kits. new tool Eduard Tempest V. Can be modified for use on other other Tempest and Typhoon kits. (designed to be used with Eduard kits) Aircraft detailing sets (resin) Catalogue £7.99 - In Stock
2
Barracuda Studios BCR48401
1:48 Hawker Tempest Mk.V Corrected Intake Set Contains a new radiator front casting with the concentric ring type intake shroud that is missing from the new Eduard Tempest V kit. Tempests not fitted with dust filters would always be fitted with the shrouding to prevent hot radiator air from entering the carburettor intake. An alternate dust filter with "cukoo clock" style doors is also included. These were fitted to Tempests op... Aircraft detailing sets (resin) Catalogue £7.99 - In Stock
5
Barracuda Studios BCR48350
1:48 Hawker Sea Fury FB.11 cowling upgrade (designed to be used with Airfix kits) This set consists of a new closed engine cowling with separate exhausts to replace the somewhat crude kit parts. Our resin cowling has fine recessed panel lines featuring very detailed and accurate cowling fasteners and deeply drilled thin walled separate exhaust banks. A simple to install upgrade that will add visual impact to your model. Aircraft detailing sets (resin) Catalogue £13.99 - In Stock
6
Barracuda Studios BCR48347
1:48 Hawker Sea Fury FB.11 Complete Cockpit Set This set contains a complete, super detailed resin cockpit to replace the kit parts. This cockpit is newly tooled, not the old Cooper Details cockpit revised. A complete cockpit tub with accurate consoles (corrects the much too narrow ones in the kits), resin instrument panel, a new seat with naturally draped, molded in belts, stick, gunsight, compass, rudder bar and other small parts... Aircraft detailing sets (resin) Catalogue £17.99 - In Stock
4
Barracuda Studios BCR32338
1:32 Supermarine Spitfire Mk.IXC Cockpit Door with separately moulded crowbar. This set contains a super detailed, accurate Spitfire cockpit access door with a separately molded crowbar for easy painting. Designed for Revell's Mk.IX, but can be easily adapted to other Spitfires (Mk.V through Mk.24) and Seafires as well. (designed to be used with Revell kits) Aircraft detailing sets (resin) Catalogue £4.99 - In Stock
7
Barracuda Studios BCR32339
1:32 Supermarine Spitfire Mk.IXC cockpit snapshot upgrade. This set features detailed port and starboard sidewalls, throttle and retract quadrants, stick, gunsight, compass, canopy latch, a sheet of decal cockpit stencils, a length of black wire to simulate the hydraulic lines on the stick and more. A quick and easy way to add a ton of detail to the cockpit in Revell's new tool Spitfire Mk.IX. Can be modified to fit other Spitfire ... Aircraft detailing sets (resin) Catalogue £15.99 - In Stock
10+
Barracuda Studios BCR72342
1:72 Supermarine Spitfire Late Cockpit Entry Door. This set consists of two detailed and accurate cockpit doors with separately molded crowbars for Spitfire Mk V thru 24 and all Seafires. Perfect for all Spitfire kits, regardless of brand. (designed to be used with Eduard kits)[Mk.VIII Mk.XIc Mk.XIXe Mk.XVI] Aircraft detailing sets (resin) Catalogue £5.99 - In Stock
2
Barracuda Studios BCR32267
1:32 de Havilland Mosquito FB Mk.VI Rocker Covers. Upgraded parts for Tamiya's new Mosquito. Will also work for the NF.II, PR.Mk.I and other single stage Merlin engined variants. Rocker covers have the prominent manufacturer nameplate molded in, which has been omitted in the kit. A quick and very visible upgrade. (designed to be used with Tamiya kits) Master Patterns by Roy Sutherland Aircraft detailing sets (resin) Catalogue £10.99 - In Stock
6
Barracuda Studios BCR32334
1:32 Hawker Tempest Mk.V nose correction (designed to be used with Revell and Special Hobby kits) This set is designed to correct the nose, radiator, prop and spinner on the otherwise stunning Special Hobby Tempest V. The problem with the nose is that the spinner baseplate diameter is too big by about 2 inches. This throws out the taper of the forward cowling. The radiator opening is also too big. This causes problems with the shap... Aircraft detailing sets (resin) Catalogue £24.99 Out of Stock
0
Barracuda Studios BCR48292
1:48 Mikoyan MiG-25PD/PDS Foxbat Nose correction Contains an accurate, detailed forward fuselage and radome to replace the inaccurate nose for the PD/MiG-25PDS versions as supplied in the Kitty Hawk kit. These parts and beautifully scribed and actually fit the kit (crazy talk, I know!) and make a great improvement in the look of the finished model. Master patterns by Mike O'Hare (designed to be used with Kitty Hawk Model kits) Aircraft detailing sets (resin) Catalogue £15.99 - In Stock
8
Barracuda Studios BCR48294
1:48 Mikoyan MiG-21 Radome Upgrade Set. Designed for the superb Eduard MiG-21 series. The kit radome is accurate and well molded. The problem is that you have to paint and install it before you assemble the fuselage halves. Our separate radome and bulkhead allow you to assemble the fuselage without the radome, which is then installed when the model is almost finished. This will allow you to fill and sand the intake seams, and paint... Aircraft detailing sets (resin) Catalogue £5.99 - In Stock
5
Barracuda Studios BCR72287
1:72 Tupolev Tu-22 Blinder Exhaust and Afterburner Set Aircraft detailing sets (resin) Catalogue £17.99 - In Stock
6
Barracuda Studios BCR72296
1:72 Rockwell B-1B Lancer Nose and Tail Correction Set - Late Contains a new accurately shaped and detailed radome, tailcone with towed decoy fairings, tailplane fairing, DAS antennas and separate flow vanes. Corrects and updates the Monogram fuselage, which was modeled after a very early production aircraft (designed to be used with Monogram and Revell kits) Aircraft detailing sets (resin) Catalogue £25.99 - In Stock
5
Barracuda Studios BCR72298
1:72 Rockwell B-1B Lancer Late Exhausts with Nacelle Correction. Contains parts to correct the rear of the kit nacelles and inner wing root, as well as detailed, accurate uncovered exhaust nozzles with separate actuators. Also features separately molded APUs, flow vanes and flame holders. The amount of detail added in this set alone is going to add a lot of visual interest to your model. For Monogramsas Rockwell B-1B Lancer (design... Aircraft detailing sets (resin) Catalogue £35.99 - In Stock
8