Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 229 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Flying Leathernecks FL32-2025
1:32 Grumman F-14A/F-14B/F-14D Tomcat Bomb Racks (designed be used with Revell, Tamiya and Trumpeter kits) This set includes four (4) highly detailed ADU-703 adapters with BRU-32 bomb racks for use on the Tamiya, Revell and Trumpeter 1/32 F-14A/B/D kits. Modification to the kit weapons rails will be necessary. Drawings with measurements on where to cut are provided. Released in cooperation with our friends at Fightertown Decals.... 3D printed resin Catalogue £12.49 Out of Stock
0
Flying Leathernecks FL32-2031
1:32 McDonnell-Douglas F/A-18A/F/A-18B/F/A-18C/F/A-18D LEX Fence x2 3D printed resin Catalogue £4.99 Out of Stock
0
Flying Leathernecks FL48-8044
1:48 LAU-7/A-6 AIM-9L/M Missile Launcher 1988-1991 (designed be used with Zoukei-Mura kits) 3D printed resin Catalogue £8.32 - In Stock
1
Flying Leathernecks FL48-8045
1:48 AERO-3B AIM-9B missile launcher for McDonnell F-4B Phantom (designed to be used with Tamiya kits) The AERO-3B missile launcher was designed to be used with the AIM-9B Sidewinder missile. This set includes 4 launchers with standoff adapters designed to be used on the Tamiya F-4B. Each launcher is 3D printed and come removed from the print supports. All that is needed is a light sanding to remove any remnant of the suppor... 3D printed resin Catalogue £8.32 Out of Stock
0
Flying Leathernecks FL48-8046
1:48 AERO-3B AIM-9B missile launcher for the Vought F-8E/J Crusader (designed be used with Hasegawa kits) The AERO-3B missile launcher was designed to be used with the AIM-9B Sidewinder missile. This set includes 4 launchers with standoff adapters designed to be used on the Hasegawa F-8E/J for direct fuselage mounting. Each launcher is 3D printed and come removed from the print supports. All that is needed is a light sanding... 3D printed resin Catalogue £8.32 - In Stock
1
Flying Leathernecks FL48-8047
1:48 AERO-3B AIM-9B missile launcher for the McDonnell F-4C/F-4D/F-4E Phantom (designed be used with Zoukei-Mura kits) The AERO-3B missile launcher was designed to be used with the AIM-9B Sidewinder missile. This set includes 4 launchers with standoff adapters designed to be used on the Zoukei-Mura F-4C/D/E. Each launcher is 3D printed and come removed from the print supports. All that is needed is a light sanding to remove ... 3D printed resin Catalogue £8.32 - In Stock
2
Flying Leathernecks FL48-8048
1:48 AERO-3B missile launcher. Designed to be used with the AIM-9B Sidewinder missile. This set includes 4 launchers and can be used on a variety of USN, USMC and USAF aircraft from the 50's and 60's. Each launcher is 3D printed and are easily removed from the print supports by using a sprue cutter. A light sanding to remove any remnant of the support nib at the nose of the part and they're ready to paint and attach to your ... 3D printed resin Catalogue £8.32 - In Stock
5
Flying Leathernecks FL48-8051
1:48 LAU-127F/A for the Boeing F/E-18E/F wing tip launchers buno 165533 thru 166684 (designed be used with Hasegawa kits) These Missile Launchers are designed to fit the Hasegawa Boeing F/A-18F Hornet wing tip and work perfectly with the Meng kit with one small modification to the kit part. Launchers come as shown and only a light sanding of the aft end to remove the support nibs is required. Integrated formation light pan... 3D printed resin Catalogue £8.32 Out of Stock
0
Flying Leathernecks FL48-8052
1:48 LAU-127F/A - Boeing F/A-18E/F Wing tip launchers BuNo 166775 and up. (designed be used with Hasegawa kits) These Missile Launchers are designed to fit the Hasegawa F/A-18F wing tip and work perfectly with the Meng kit with one small modification to the kit part. Launchers come as shown and only a light sanding of the aft end to remove the support nibs is required. Integrated formation light panel fits into slot on both kit win... 3D printed resin Catalogue £8.32 Out of Stock
0
Flying Leathernecks FL48-8053
1:48 FPU-6/A Oval Fuel Tank for Early McDonnell-Douglas F/A-18A/B Hornet. The FPU-6/A Oval Fuel Tank was developed for the F/A-18A/B Hornet in 1978 and used on the FSD aircraft, as well as a few fleet Hornets into the mid 1980's. It was phased out due to fatigue anomalies caused by the oval configuration. This set includes two hollow tanks that require assembly. Some light sanding to remove support nibs on the mating surfaces o... 3D printed resin Catalogue £12.49 - In Stock
2
Flying Leathernecks FL48-8056
1:48 McDonnell-Douglas F/A-18A/F/A-18B/F/A-18C/F/A-18D LEX Fence. This set includes correctly shaped and sized LEX Fence parts applicable to all 1/48 F/A-18A/B/C/D Hornet kits (designed to be used with Esci and Hasegawa kits etc) 3D printed resin Catalogue £4.99 - In Stock
3
Flying Leathernecks FL48-8057
1:48 LAU-115/A Launcher x 4 forF/A-18A/B/C/D 3D printed resin Catalogue £6.66 - In Stock
4
Flying Leathernecks FL48-8058
1:48 LAU-115C/A Launcher x 4 3D printed resin Catalogue £6.66 - In Stock
1
Flying Leathernecks FL172-2004
1:72 Bell AH-1Z TSS Turret (designed to be used with Dream Models kits) 3D Resin 3D printed resin Catalogue £4.16 Out of Stock
0
Flying Leathernecks FL48-8025
1:48 McDonnell F-4B Phantom Fin Cap with AN/APR-24 RHAW Antenna (designed to be used with Tamiya kits) 3D printed resin Catalogue £6.66 Out of Stock
0
Flying Leathernecks FL48-8026
1:48 McDonnell F-4B Phantom Early Fin Cap (designed to be used with Tamiya kits) 3D printed resin Catalogue £6.66 - In Stock
5+
Flying Leathernecks FL48-8027
1:48 McDonnell F-4B Phantom Fin Cap with AN/APR-25 RHAW Antenna (designed to be used with Tamiya kits) 3D printed resin Catalogue £6.66 - In Stock
5+
Flying Leathernecks FL32-2003
1:32 Mark 83 1000lb Bombs with BSU-85 fins. This set includes two (2) Mark 83 1000lb bombs, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mark 83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. 3D printed resin Catalogue £12.49 - In Stock
5+
Flying Leathernecks FL32-2013
1:32 Mk-77 Mod 4 Fire Bombs w/ decals. We have teamed up with AOAdecals for this release. Each set will include two fire bombs along with the stencils provided by AOA. Some minor clean up of the forward end of the bomb will be required to remove the print support nibs. A few swipes with a file and sanding sticks does the trick. Set contains two Fire Bombs and a decal sheet 3D printed resin Catalogue £12.49 - In Stock
5+
Flying Leathernecks FL32-2016
1:32 GBU-32 1000lb JDAM Set includes two Mark 83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D printed resin Catalogue £12.49 - In Stock
5+
Flying Leathernecks FL32-2018
1:32 GBU-38 500lb JDAM with thermal protective coating - Set includes two Mark 82/BLU-111 bombs with rough ablative coating, two KMU-572 kits, which include the tail assemblies and nose strake as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D printed resin Catalogue £12.49 - In Stock
5+
No Image Flying Leathernecks FL32-2019
1:32 Mark 82 / BLU-111/B with BSU-33 Fin 3D Resin 3D printed resin Catalogue £16.66 - In Stock
5+
Flying Leathernecks FL32-2021
1:32 Mark 83 / BLU-110A/B with BSU-85 Fin - Thermally Protected 3D Resin 3D printed resin Catalogue £12.49 - In Stock
5+
Flying Leathernecks FL32-2034
1:32 Mark 82 with BSU-86 retarded fin 3D Resin 6 bombs 3D printed resin Catalogue £16.66 - In Stock
5+
Flying Leathernecks FL32-2035
1:32 Mark 82 thermally protected with BSU-86 retarded fin 3D Resin 6 bombs 3D printed resin Catalogue £16.66 - In Stock
5+