Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 136 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Flying Leathernecks FL172-2000
1:72 McDonnell F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet 'early' pylons 3D printed Catalogue £9.99 - In Stock
3
Flying Leathernecks FL172-2001
1:72 Boeing F/A-18A+/A++/C/D Pylons 'Late' Set FL172-2001 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D. These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532 and aircraft upgraded to F/A-18A++ standard. The F/A-18A++ can be easily identified by the installation of the SJU-17 NACES ejection seat, IFF antenna on the nose, GPS dome a... 3D printed Catalogue £9.99 Out of Stock
0
Flying Leathernecks FL172-2002
1:72 Bell AH-1Z/UH-1Y FMV Tail Mod (designed to be used with Dream Model kits) 3D Resin 3D printed Catalogue £4.99 - In Stock
4
No Image Flying Leathernecks FL172-2003
1:72 Mark 83 1000lb bomb with conical fin (6 bombs) 3D Resin 3D printed Catalogue £9.99 - In Stock
5
No Image Flying Leathernecks FL172-2005
1:72 Mark 83 1000lb bomb with BSU-85 fin (6 bombs) 3D Resin 3D printed Catalogue £9.99 - In Stock
5+
Flying Leathernecks FL172-2007
1:72 Mk-77 Fire Bombs (6) 3D Resin 3D printed Catalogue £9.99 - In Stock
2
Flying Leathernecks FL172-2011
1:72 GBU-38 500lb JDAM (6) 3D Resin 3D printed Catalogue £9.99 - In Stock
5+
Flying Leathernecks FL172-2012
1:72 GBU-32(V)2/B 1000lb JDAM (6) 3D Resin 3D printed Catalogue £9.99 - In Stock
3
No Image Flying Leathernecks FL172-2019
1:72 Mark 82 500lb bomb with BSU-33 fin 3D Resin 3D printed Catalogue £9.99 - In Stock
5+
No Image Flying Leathernecks FL172-2034
1:72 Mark 82 500lb bomb with BSU-86 retarded fin 3D Resin 3D printed Catalogue £9.99 - In Stock
5
Flying Leathernecks FL172-2035
1:72 Mark 82 500lb bomb with BSU-86 retarded fin thermally protected 3D Resin 3D printed Catalogue £9.99 - In Stock
5+
No Image Flying Leathernecks FL172-2036
1:72 LAU-7/A thru LAU-7/A-3" 1958 to 1975 (4) 3D Resin 3D printed Catalogue £7.99 Out of Stock
0
No Image Flying Leathernecks FL172-2037
1:72 LAU-7A/A for USAF McDonnell F-4C/F-4D/F-4E Phantom" 1964 and throughout Vietnam (4) 3D Resin 3D printed Catalogue £7.99 Out of Stock
0
No Image Flying Leathernecks FL172-2038
1:72 LAU-7/A-4" LAU-7/A-5" 1976 to 1987 (4) 3D Resin 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL172-2039
1:72 LAU-7A/A Missile Launcher for USAF F-4C/D/E 1964-1975 3D printed Catalogue £7.99 Out of Stock
0
Flying Leathernecks FL172-2042
1:72 LAU-7/A-6 for USN/USMC 1988 - Present 3D printed Catalogue £7.99 Out of Stock
0
Flying Leathernecks FL172-2043
1:72 LAU-7F/A Missile Launcher for USMC F/A-18C/D 2010 - Present 3D printed Catalogue £7.99 - In Stock
3
Flying Leathernecks FL32-2000
1:32 F/A-18A/B/C/D HUD for BuNo's 161353 thru 163782 All NEW design HUD assembly for use with the Academy kit parts. Complete unit is 3D printed and comes ready to install after a small modification to the kit parts. Includes die cut 'glass' in .005 clear styrene 3D printed Catalogue £7.99 Out of Stock
0
Flying Leathernecks FL32-2001
1:32 McDonnel-Douglas AV-8B Harrier HUD This item is 3D printed and comes ready to install. 'Glass' cut in .005 clear styrene also included. 3D printed Catalogue £7.99 - In Stock
5+
Flying Leathernecks FL32-2003
1:32 Mark 83 1000lb Bombs with BSU-85 fins. This set includes two (2) Mark 83 1000lb bombs, two (2) BSU-85 fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mark 83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. 3D printed Catalogue £14.99 - In Stock
5+
Flying Leathernecks FL32-2005
1:32 1001/1021 Pylons for F/A-18A/B BuNo 161353 thru 163175. This set of pylons corrects the inaccurately shaped pylons included in the Academy kit. Each set is 3D printed to ensure the best quality possible, as well as to minimize the work required to prepare them for installation on your model. An added bonus is the realistic way in which ordnance can be attached to the pylon. The suspension lugs on the Aires GBU-12 fit perfectly... 3D printed Catalogue £29.99 - In Stock
1
Flying Leathernecks FL32-2006
1:32 1003/1027 Pylons for F/A-18A/C/D BuNo 163427 thru 163782 3D printed Catalogue £29.99 - In Stock
2
Flying Leathernecks FL32-2007
1:32 1005/1033 F/A-18C/D Pylons for BuNo's 163985 thru 165532 3D Resin 3D printed Catalogue £29.99 Out of Stock
0
Flying Leathernecks FL32-2012
1:32 LAU-68F/A APKWS (empty) This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft. Pods are 3D printed and come ready to paint and attach to your model (no casting blocks or supports to remove). 3D printed Catalogue £11.99 - In Stock
1
Flying Leathernecks FL32-2013
1:32 Mk-77 Mod 4 Fire Bombs w/ decals. We have teamed up with AOAdecals for this release. Each set will include two fire bombs along with the stencils provided by AOA. Some minor clean up of the forward end of the bomb will be required to remove the print support nibs. A few swipes with a file and sanding sticks does the trick. Set contains two Fire Bombs and a decal sheet 3D printed Catalogue £14.99 - In Stock
5+

   1   |   2   |   3   |   4   |   5      »      [6]

Search Area Manufacturer Item Type Search

Part Number Scale Keywords Results per Page
Exact Match
Sort by:
Sort Direction:
Added Within last week
last 2 weeks
last month
last 6 months
last year