Barracuda Studios - Aircraft detailing sets (resin)

Back to manufacturer page

Table/Grid viewToggle View

  • Code Scale Description Type Department Price Stock
  • View Photo
    Barracuda Studios BCR24202
    1:24Hawker Typhoon Mk.Ib carb intake (designed to be used with Airfix kits)Aircraft detailing sets (resin)Catalogue£5.997
  • View Photo
    Barracuda Studios BCR32002
    1:32Supermarine Spitfire Mk.XIII/ Supermarine Spitfire Mk.IXc cockpit door interior with crowbar (designed to be used with Tamiya kits) This set consists of a new resin cast cockpit door with separate crowbar that actually fits into the door's clips. Detailed down to the door latch springs, this little part is highly visible, so all that added detail really pays off. Will also upgrade all other 1/32nd Supermarine Spitfire models, ...Aircraft detailing sets (resin)Catalogue£5.9918
  • View Photo
    Barracuda Studios BCR32003
    1:32Supermarine Spitfire Mk.XIII/ Supermarine Spitfire Mk.IXc cockpit upgrade Set (designed to be used with Tamiya kits) New Revised Set. Replaces the Tamiya kit parts for the control column, throttle quadrant, retract quadrant and compass with more detailed resin pieces. An oxygen hose is also included, and the set is completed with the inclusion of a revised and expanded sheet of stencil and placard decals for the cockpit, inclu...Aircraft detailing sets (resin)Catalogue£7.9922
  • View Photo
    Barracuda Studios BCR32004
    1:32Supermarine Spitfire Mk.IXc rocker covers with Rolls-Royce logos (designed to be used with Tamiya kits) Directly replaces the beautiful Tamiya kit rocker covers for the two Stage Merlin 60 series engine with new resin covers that feature the much sought after Rolls-Royce logo plates molded on. A simple detail upgrade for the engine compartment.Aircraft detailing sets (resin)Catalogue£6.9918
  • View Photo
    Barracuda Studios BCR32007
    1:32Supermarine Spitfire Mk.IXc gun covers with wide blisters (designed to be used with Tamiya kits) The wide blister C wing gun covers in the Tamiya kit are very nice, but the cannon fairing blisters are too square in the front. This set directly replaces the kit's upperwing gun covers with more rounded resin castings. A simple way to accurize your early Spit Mk.IX.Aircraft detailing sets (resin)Catalogue£6.990
  • View Photo
    Barracuda Studios BCR32008
    1:32Supermarine Spitfire Starboard Cockpit Sidewall (designed to be used with Tamiya kits) Designed to replace the kit lower sidewall for the Tamiya Supermarine Spitfire Mk.VIII, Mk.IXc, and Mk.XVI. This set also includes the missing remote contactor. The new resin sidewall has been molded with all the complex plumbing of the windscreen de-icer system, as well as the oxygen line. A number of other details have been added including...Aircraft detailing sets (resin)Catalogue£7.9919
  • View Photo
    Barracuda Studios BCR32012
    1:32North-American P-51D Mustang Cockpit Sidewalls (with PE parts) (designed to be used with Tamiya kits) This set consists of new super detailed, accurate resin sidewalls, which replace the Tamiya kit parts. Many handles and levers have been molded separately to ease painting and improve accuracy. A fret of photoetched parts rounds out this set, and it includes a number of cockpit details such as canopy rails, rudder pedal insert...Aircraft detailing sets (resin)Catalogue£12.997
  • View Photo
    Barracuda Studios BCR32013
    1:32North-American P-51D Mustang Instrument Panel (with PE parts) (designed to be used with Tamiya kits) The Tamiya kit instrument panel is replaced with a mixed media parts featuring a resin main panel with improved knobs and switches. The main instrument panel has been replaced with a multi-part photoetched assembly with readable and authentic film dials. The instrument bezels have been etched separately in order to get the full...Aircraft detailing sets (resin)Catalogue£11.9914
  • View Photo
    Barracuda Studios BCR32014
    1:32North-American P-51D Mustang cockpit upgrade set (with PE parts) (designed to be used with Tamiya kits) This upgrade set contains a number of cockpit components that benefit from being produced in resin, allowing more accurate and detailed parts for your P-51 Mustang's cockpit. Fully detailed radio and batteries come complete with a battery wiring diagram. The radio includes resin wiring harness parts. The throttle quadrant is...Aircraft detailing sets (resin)Catalogue£8.998
  • View Photo
    Barracuda Studios BCR32016
    1:32North-American P-51D Mustang Corrected Paper Drop tanks (designed to be used with Tamiya kits) Super-detailed, seamless nose and tailcones for Tamiya's 108 gallon drop tanks capture the rough, scalloped look of the paper mache. The paper drop tanks in the Tamiya Mustang kit are accurate in shape and size, but they do not capture the 'look' of the end caps on the real tanks. The real tanks are made of compressed, impregnated pa...Aircraft detailing sets (resin)Catalogue£9.993
  • View Photo
    Barracuda Studios BCR32020
    1:32Mercedes D.III/D.IIIa Intake Manifold (designed to be used with Wingnut Wings kits) This simple two part resin upgrade set replaces the kit intake manifolds for the following kits: Roland D.IVa Pfalz D.III Pfalz D.IIIa Albatros D.V and D.Va Pfalz D.XII Fokker D.VII The parts are designed specifically for the above listed WNW kits in 1/32nd scale, but will work with Roden and others with a small amount of modification...Aircraft detailing sets (resin)Catalogue£7.996
  • View Photo
    Barracuda Studios BCR32063
    1:32Heinkel He-219A-7 Uhu Open Cowl Flaps Set (designed to be used with Revell kits) A pair of beautifully detailed open engine cowl flaps and two accurate one-piece radiator units, complete with plumbing and actuator mounting ring are contained in this set. A full set of cowl flap actuator rods with spares are also included. When installed, the open flaps reveal the detailed radiator beneath, along with the detailed inside surfac...Aircraft detailing sets (resin)Catalogue£16.9914
  • View Photo
    Barracuda Studios BCR32141
    1:32Hawker Typhoon Mk.Ib /Hawker Tempest Mk.V Intake Ring (designed to be used with Pacific Coast Models kits) This set consists of an accurate one piece, seamless resin carburetor intake duct and shroud. It replaces the somewhat crude multi-part duct found in the otherwise very nice PCM Tempest V. Also fitted to many Typhoons and other Tempest Mk.V kits.Aircraft detailing sets (resin)Catalogue£3.9916
  • View Photo
    Barracuda Studios BCR32154
    1:32Messerschmitt Bf-109G-10 (Bf-109G5 to Bf-109G-14) Cowl Gun Bulges (designed to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£6.9913
  • View Photo
    Barracuda Studios BCR32155
    1:32Messerschmitt Bf-109G-6 intake and exhaust set (designed to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£8.9923
  • View Photo
    Barracuda Studios BCR32156
    1:32Messerschmitt Bf-109G-10 Intake and Exhaust Set. This set contains a new seamless resin supercharger intake, separate hollow cooling scoops and accurate and detailed exhausts with recessed openings to replace the kit items in the Revell G-10. Filling the seams inside the intake is a tricky and time consuming process. We have saved you from having to tackle this less than thrilling task. This is a simple, easy to install upgrad...Aircraft detailing sets (resin)Catalogue£8.994
  • View Photo
    Barracuda Studios BCR32157
    1:32Messerschmitt Bf-109G-6 Upper Gun Cowling (Standard) - This set consists of one detailed, accurate upper cowling. This set improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell's Bf 109G-6 kit part. For non-Erla built Bf-109G-6s. A one piece, easy to install correction for the Revell kit. Pattern by Gunnar Jansson (deigned to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£11.9524
  • View Photo
    Barracuda Studios BCR32158
    1:32Messerschmitt Bf-109G-6 Upper Gun Cowling (Erla) - This set consists of one detailed, accurate upper cowling specific to the Erla built 109G-5 and G-6 aircraft. The gun troughs are different on these Erla built machines. Erla upper cowlings have a rectangular panel line around them. This set also improves the detail and corrects the spacing of the machine gun troughs, which are too close together on Revell's Bf 109G-6 kit part...Aircraft detailing sets (resin)Catalogue£11.9931
  • View Photo
    Barracuda Studios BCR32159
    1:32Messerschmitt Bf-109G-6 oil cooler fairing (designed to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£5.9910
  • View Photo
    Barracuda Studios BCR32160
    1:32Messerschmitt Bf-109G-10 and Bf-109K-4 Oil Cooler Fairing. This set contains one detailed, accurately shaped resin oil cooler fairing and separate exit flap that replaces the kit fairing. It is too slab sided on Revell's Bf-109G-10. Much study of photos was made in the preparation of this new set. A quick and easy drop fit replacement that will make your Erla G-10 even more accurate. (designed to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£5.997
  • View Photo
    Barracuda Studios BCR32169
    1:32Messerschmitt Bf-109G Upperwings with Small Wheel Bulges. Resin inner upperwing sections with small wheel bulges to convert the Revell Bf-109G-10 wing (which only gives you the late wide tire/tyre bulge) for the many narrow wheel schemes. This section is also a correction for the G-6 kit, as the wheel bulges are molded incorrectly . The cross section of the bulge is reversed, with the high point of the bulge being inboard inst...Aircraft detailing sets (resin)Catalogue£11.996
  • View Photo
    Barracuda Studios BCR32171
    1:32Messerschmitt Bf-109G/K Prop and Spinner Alignment Jig. This set contains a resin jig that will allow you to center drill the spinner from BR32122 Bf-109G-6 Prop and Spinner and BR32123 Messerschmitt Bf-109G-10 Prop and Spinner. It also contains a blade alignment jig for the standard 109G-6 type prop blade as well as the wider paddle G-10 style blade. This set is cheap, easy to use and reusable! A must have for the dedicated G...Aircraft detailing sets (resin)Catalogue£4.996
  • View Photo
    Barracuda Studios BCR32173
    1:32Supermarine Spitfire Mk.I-Mk.V Cockpit Door - No Crowbar. This set contains an accurate and highly detailed Supermarine Spitfire cockpit door with no crowbar to replace the door in Revell's Mk.IIa kit. Fits Hasegawa, Trumpeter too. (designed to be used with Hasegawa, Revell and Trumpeter kits) Master patterns by Roy Sutherland.Aircraft detailing sets (resin)Catalogue£4.9913
  • View Photo
    Barracuda Studios BCR32174
    1:32Supermarine Spitfire Mk.I-Mk.V Cockpit Upgrade Set This set contains a number of small detail parts to detail and accurize the cockpit in the new Supermarine Spitfire Mk.IIa. Parts include a new 3 part stick, gunsight, throttle, retract quadrant, remote contactor, compass and mount, canopy latch and early style radio selector. Also includes a sheet of cockpit stencil decals. (designed to be used with Revell kits) Master pat...Aircraft detailing sets (resin)Catalogue£7.995
  • View Photo
    Barracuda Studios BCR32175
    1:32Supermarine Spitfire Mk.I/Mk.II Wing Correction Set. This set contains detailed fabric ailerons to replace the inaccurate metal ones included in the kit, Mk.I style oil cooler to replace the Kit Mk.V style, new radiator housing complete with wing intake and exit ramps for Revell's Supermarine Spitfire Mk.IIa kit. (designed to be used with Revell kits) Master patterns by Roy Sutherland.Aircraft detailing sets (resin)Catalogue£12.9920
  • View Photo
    Barracuda Studios BCR32262
    1:32de Havilland Mosquito WWII Radio Upgrade Set. This set consists of a pair of accurate, super detailed British T1154 (transmitter) and R1155 (receiver) radios with separately molded knobs for ease of painting, and full stencil, placard and dial decals. Electrical connectors are also supplied along with full color, illustrated instruction that includes a wiring diagram. For your 1/32nd scale WWII era Mosquito or can be displayed...Aircraft detailing sets (resin)Catalogue£9.9915
  • View Photo
    Barracuda Studios BCR32265
    1:32de Havilland Mosquito FB Mk.VI Ammo Feed Chutes (designed to be used with Tamiya kits) This set is a very visible and much needed upgrade to the otherwise stunning Mosquito from Tamiya. The kit feed chutes are molded as empty. This set contains ten parts that give you feed chutes complete with .303" and 20mm ammunition visible through the slots. The slots and ammo are undercut to give a very convincing look of shells inside a ...Aircraft detailing sets (resin)Catalogue£11.999
  • View Photo
    Barracuda Studios BCR32267
    1:32de Havilland Mosquito FB Mk.VI Rocker Covers. Upgraded parts for Tamiya's new Mosquito. Will also work for the NF.II, PR.Mk.I and other single stage Merlin engined variants. Rocker covers have the prominent manufacturer nameplate molded in, which has been omitted in the kit. A quick and very visible upgrade. (designed to be used with Tamiya kits) Master Patterns by Roy SutherlandAircraft detailing sets (resin)Catalogue£10.994
  • View Photo
    Barracuda Studios BCR32334
    1:32Hawker Tempest Mk.V nose correction (designed to be used with Revell and Special Hobby kits) This set is designed to correct the nose, radiator, prop and spinner on the otherwise stunning Special Hobby Tempest V. The problem with the nose is that the spinner baseplate diameter is too big by about 2 inches. This throws out the taper of the forward cowling. The radiator opening is also too big. This causes problems with the shap...Aircraft detailing sets (resin)Catalogue£24.9910
  • View Photo
    Barracuda Studios BCR32338
    1:32Supermarine Spitfire Mk.IXC Cockpit Door with separately moulded crowbar. This set contains a super detailed, accurate Spitfire cockpit access door with a separately molded crowbar for easy painting. Designed for Revell's Mk.IX, but can be easily adapted to other Spitfires (Mk.V through Mk.24) and Seafires as well. (designed to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£4.994
  • View Photo
    Barracuda Studios BCR32339
    1:32Supermarine Spitfire Mk.IXC cockpit snapshot upgrade. This set features detailed port and starboard sidewalls, throttle and retract quadrants, stick, gunsight, compass, canopy latch, a sheet of decal cockpit stencils, a length of black wire to simulate the hydraulic lines on the stick and more. A quick and easy way to add a ton of detail to the cockpit in Revell's new tool Spitfire Mk.IX. Can be modified to fit other Spitfire ...Aircraft detailing sets (resin)Catalogue£15.998
  • View Photo
    Barracuda Studios BCR32340
    1:32Supermarine Spitfire Mk.IXc Wing Correction (Revell) - This set contains a pair of new resin wing sections featuring accurate intake & exhaust ramps to replace the flat wing sections in the kit. Also included are new detailed radiator fairings and radiator faces to replace the less detailed kit parts. Clear, illustrated step by step instructions walk you through the installation. A real improvement for the Revell kit. Master p...Aircraft detailing sets (resin)Catalogue£14.9922
  • View Photo
    Barracuda Studios BCR32365
    1:32Messerschmitt Bf-109G Cockpit Stencils, Placards with Instrument Panel. This set consists of a decal sheet that gives you all the small stencils and placards typically found in Bf 109G cockpits. It also includes a beautifully detailed resin instrument casting that can be painted up and a choice of two different printings of the instrument faces: Scale instrument markings that are very fine, and another more bold set if you pre...Aircraft detailing sets (resin)New Arrivals£8.9932
  • View Photo
    Barracuda Studios BCR32411
    1:32Avro Lancaster Mk.I/III WWII Radio Upgrade Set This set consists of a pair of accurate, super detailed British T1154 (transmitter) and R1155 (receiver) radios with separately molded knobs for ease of painting, and full stencil, placard and dial decals. Electrical connectors are also supplied along with full color, illustrated instruction that includes a wiring diagram. For your 1/32nd scale WWII era Lancaster or can be displa...Aircraft detailing sets (resin)Catalogue£9.9916
  • View Photo
    Barracuda Studios BCR32448
    1:32Messerschmitt Bf-109F/Bf-109G-6 Separate Control Surfaces - The set consists of new resin ailerons, elevators and standard rudder for the Revell kit. Why did we make them? The kit parts have nice fabric rib tape detail, but it is overstated, and the trailing edges are quite thick when assembled. It takes a good bit of careful sanding and shaping to thin the edges and make the fabric detail properly subtle. We have done it for ...Aircraft detailing sets (resin)Catalogue£13.9918
  • View Photo
    Barracuda Studios BCR32460
    1:32Supermarine Spitfire Mk.IX Early (Small) Carburettor Intake. Contains new resin lower engine cowling with an accurate early style carburettor intake to allow you to build the earlier Spitfire IXs from the Revell kit. The early intake is not included in the box. A quick and easy conversion that opens up a lot of marking possibilities. (designed to be used with Revell kits)[Mk.IXc] Master patterns by Roy Sutherland.Aircraft detailing sets (resin)New Arrivals£11.9945
  • View Photo
    Barracuda Studios BCR32461
    1:32Supermarine Spitfire Mk.IXc Late (Aerovee) Carb Intake - Contains a new resin lower engine cowling w accurate, detailed, late style Aerovee carburetor intake to improve the simplified, inaccurate Revell Spitfire Mk IX parts. A quick and easy one-piece replacement. For the Revell Spit IX kit. Mastered by Roy Sutherland (designed to be used with Revell kits)Aircraft detailing sets (resin)Catalogue£11.9912
  • View Photo
    Barracuda Studios BCR32471
    1:32Messerschmitt Bf-109F, G and K Aileron Mass Balances. Contains 4 sets of resin cast aileron mass balances (or 3 sets and a couple of spares) to replace lost, broken kit or crude parts. Can be fitted to any 1/32nd kit of the Bf 109F, G or K. Simple installation. Master pattern by Roy Sutherland.Aircraft detailing sets (resin)New Arrivals£8.9940
  • View Photo
    Barracuda Studios BCR48007
    1:48Hawker Sea Fury FB.11 90 gallon drop tanks wheel (designed to be used with Hobbycraft and Trumpeter kits) This set consists of a pair of resin cast 90 gallon droptanks to replace the inaccurate kit parts in the Trumpeter and Hobbycraft Sea Fury kits. The Trumpeter tanks are both misshapen and grossly oversized. Designed as a drop fit replacement for the Trumpeter Sea Fury kit.Aircraft detailing sets (resin)Catalogue£5.996
  • View Photo
    Barracuda Studios BCR48008
    1:48Gloster Meteor Small Bore Intakes (designed to be used with Classic Airframe kits) A quick and easy upgrade for Classic Airframes' extremely nice and accurate kits of the postwar marks of the Gloster Meteor in 1/48. They can be adapted to work on the beautiful Aeroclub vac kits. These seamless resin intakes are a direct replacement for the kit parts.Aircraft detailing sets (resin)Catalogue£11.992
  • View Photo
    Barracuda Studios BCR48009
    1:48Gloster Meteor Large Bore Intakes (designed to be used with Classic Airframe kits) A quick and easy upgrade for Classic Airframes' extremely nice and accurate kits of the postwar marks of the Gloster Meteor in 1/48. They can be adapted to work on the beautiful Aeroclub vac kits. These seamless resin intakes are a direct replacement for the kit parts.Aircraft detailing sets (resin)Catalogue£11.993
  • View Photo
    Barracuda Studios BCR48024
    1:48Griffon Supermarine Spitfire Rocker Cover Fairings. New accurately shaped, detailed cast resin rocker cover fairings designed to correct the Airfix Supermarine Spitfire Mk.22/24 and Seafire FR.46/FR.47 kit parts. Will also improve most other Griffon Supermarine Spitfire kits. A quick and simple correction (designed to be used with Airfix kits)Aircraft detailing sets (resin)Catalogue£5.999
  • View Photo
    Barracuda Studios BCR48025
    1:48Supermarine Spitfire Mk.22/24 and Seafire FR.46 / FR.47 carburetor intake. Seamless, detailed carburetor intake with separate filter flap designed for Airfix Supermarine Spitfire Mk.22/24 and Seafire FR.46/FR.47. The kit intake has a very prominent and hard to eliminate seam running all down the inside surfaces. May be adapted to fit other Griffon Supermarine Spitfire kits (designed to be used with Airfix kits)Aircraft detailing sets (resin)Catalogue£5.998
  • View Photo
    Barracuda Studios BCR48027
    1:48Supermarine Spitfire Mk.22/24 and Seafire FR.46 / FR.47 Control Surfaces. This set consists of resin cast separate control surfaces features a new rudder, elevators with matching horizontal stabilizer s and ailerons for the Airfix Supermarine Spitfire Mk.22/24 and Seafire FR.46 / FR.47 kits. It's a time saving way to add interest to your model. Actuators included (designed to be used with Airfix kits)Aircraft detailing sets (resin)Catalogue£9.993
  • View Photo
    Barracuda Studios BCR48028
    1:48Supermarine Spitfire Camera Bay Inserts. This set includes two resin cast vertical F.24 camera faces, and one oblique F.24 camera (front and back inserts) for all PR/FR Spitfires and other RAF, FAA aircraft. Add some visible detail through the clear camera ports by replicating the front face of the cameras within. Quick and easy! (designed to be used with Airfix kits)Aircraft detailing sets (resin)Catalogue£5.9917
  • View Photo
    Barracuda Studios BCR48041
    1:48Hawker Typhoon Mk.IB cockpit interior set (designed to be used with Eduard and Hasegawa kits)Aircraft detailing sets (resin)Catalogue£17.998
  • View Photo
    Barracuda Studios BCR48082
    1:48Lockheed F-104 Starfighter drag chute housing (designed to be used with Hasegawa kits)[F-104C/F-104DJ/F-104G/F-104J/F-104S]Aircraft detailing sets (resin)Catalogue£5.997
  • View Photo
    Barracuda Studios BCR48094
    1:48Supermarine Spitfire PR Mk.XIX Seamless Carburettor Intake. This set consists of a seamless, detailed carburetor intake with separate filter flap designed for Airfix's recent and beautiful Supermarine Spitfire Mk XIX kit. The kit intake has a very prominent and hard to eliminate seam running all down the inside surfaces. May be adapted to fit other Griffon Supermarine Spitfire kits or marks. (designed to be used with Airfix ki...Aircraft detailing sets (resin)Catalogue£4.9913