Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Search Results



Found 115 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Anigrand Craftswork ANIG2001
1:72 Lippisch Li.P.13B Luft '46 Ramjet concept. In 1944, Germany started to face the fuel shortage problem. Dr. Alexander Lippisch and his design team had proceeding with the P.13a design in Austria and he though to try 'coal' to be a new kind of fuel for his ramjet fighter concepts. A hexagonal shape combustion chamber was selected for coal filling from a center top but it was no way to fit into the P.13a fuselage. So the differen... Aircraft kits (resin) Catalogue £24.99 - In Stock
2
Anigrand Craftswork ANIG2002
1:72 Bell X-22 Tilting ducts VTOL experiment. During early 1950s, Bell Aircraft began studying conventional propeller and jet design. In 1957, Bell signed contract from Navy for design of ducted propeller assault transport with VTOL capability. This study also caught attention of the Air Force, Marine Corp and Army, and joined for study during 1959. In 1962, Bell and Navy signed contract for the new test-bed, designated X-22. Its d... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2004
1:72 Mikoyan MiG-105-11 EPOS Soviet Space-plane / Lifting body project. In 1964, ex-USSR defense unit issued a 5-years military space plan, that included the 'Spiral' space-plane project. The MiG 105-11 EPOS was planned as an experimental manned spacecraft, that was under development in Mikoyan bureau as a part of the Spiral program. The Spiral space system consisted of an orbital spacecraft (MiG 105) with a rocket booster and supe... Aircraft kits (resin) Catalogue £34.99 - In Stock
2
Anigrand Craftswork ANIG2005
1:72 Curtiss-Wright X-19 Tilt-propellers VTOL experiment. In 1958, Curtiss-Wright started the four passengers VTOL commercial aircraft program without any government support. It was designed with a tilting propeller at each wing tip that a nacelle could rotate in pointing vertical for take off and landing and pointing horizontal for cruise. When the two prototypes were almost completed, Curtiss-Wright decided to offer these two air... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2008
1:72 Doak VZ-4DA Archaeopteryx of tilt-ducts VTOL. The Doak Model 16 was the first aircraft to demonstrate the tilt duct concept. In 1956, U.S. Army ordered a prototype, indicated VZ-4DA. The configuration was the tilting duct blower where located at each wing tip, pointing vertical for take off and landing, and rotated to the horizontal for forward flight. Engine exhaust was deflected at the fuselage rear for pitch control. To lim... Aircraft kits (resin) Catalogue £34.99 - In Stock
2
Anigrand Craftswork ANIG2009
1:72 General-Dynamics A-12 Avenger II Naval stealth attacker project. In mid-1980's, U.S. Navy awarded the ATA (Advanced Tactical Aircraft) program as a replacement for the Grumman A-6 Intruder. The key improvement over the existing aircraft was stealth ability. In 1988, General-Dynamics / McDonnell-Douglas were selected to develop a subsonic twin jet carrier- based ATA for attack at night or in bad weather, the A-12 Avenger II. Th... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2011
1:72 Hiller X-18 Tilt-wing VTOL cargo transport experiment. During early 1955, Hiller Aircraft designed a large, tilt-wing VTOL aircraft as an in-house study. In 1956, U.S. Air Force interested this concept and assigned contract to Hiller for the development of a VTOL cargo transport. The test bed was designated X-18. In order to speed the construction process and to conserve available Air Force funding, the X-18 was built from exi... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2012
1:72 Orbital Sciences X-34 RLV Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2014
1:72 Northrop HL-10 The fastest Lifting body. In 1962, NASA started a program to build a lightweight, powerless lifting body, the M2-F1 as a prototype to study the wingless vehicle concept. It was designed to demonstrate the ability of pilots to maneuver in the atmosphere, and safety landing after reentry from space. With the success of the M2-F1 program, which led to NASA's development of two heavyweight, powered lifting bodies, t... Aircraft kits (resin) Catalogue £34.99 Out of Stock
0
Anigrand Craftswork ANIG2015
1:72 Northrop M2-F2 First powered Lifting body. In 1957, NASA had investigated the problems associated with re-entry from space of missile nose cone. Engineers conceived the lifting body idea that by modifying a cone shape, aerodynamic lift could be produced to fly back from space rather than plunge to the earth. This study led to the design known as the M-2, a 'M'odified half-cone, rounded on bottom and flat on top, with twin tail... Aircraft kits (resin) Catalogue £34.99 - In Stock
2
Anigrand Craftswork ANIG2016
1:72 XF-109 Tilting jets VTOL supersonic fighter. In 1953, Bell Aircraft Corp developed a VTOL research aircraft, the Model 65 ATV that a pair of turbojets were mounted one each side of the fuselage and could rotated at the aircraft center. The ATV program ended in 1955 and gave Bell experience of the VTOL jet flight, that also led to U.S. Air Force and Navy sponsorship of the project D-188A tilting jets fighter, designated USAF's ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2018
1:72 North-American XF-108 Rapier Mach 3 escort fighter for XB-70. In 1955, USAF launched the program of LRIX (Long-Range Interceptor Experiment), that the fighter was to be capable of March 3 performance and could destroy attacking Soviet bombers over the poles before they could get near U.S. territory. As it was also to be the escort fighter for the XB-70 bomber that was built by North-American Aviation, the company also was issu... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2020
1:72 Republic XF-103. In 1949, U.S. Air Force introduced the new 'weapons system' concept, in which consisting of the air-to-air guided missiles, fire control system and the '1954 interceptor' capable of supersonic flight. The project was designed to intercept the new Soviet intercontinental bombers. In 1951, Air Force announced that the Convair's YF-102Aand the Republic's XF-103 were selected for the airframe part of the project. ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2021
1:72 Northrop YA-9A. In 1970s, U.S. Air Force launched the A-X requirement that a new designed ground-attack aircraft could provided stable platform for bombing accuracy over the battlefield area. It was also required to be durable for flight close to the ground, in range of enemy guns. The under-wing pylons could carry almost all arms in Air Force inventory. Northrop submitted the YA-9A to the Air Force in competition with the Fai... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2022
1:72 Sikorsky S-67 In 1964, U.S. Army lunched the AAFSS specification, that calling for an aircraft with a high-speed cruising and long-time hovering capability. Sikorsky submitted the S-66 pusher tail rotor project that competitor with Lockheed AH-56 Cheyenne. The AH-56 won the contest but failed to meet the expectations. For intended to replace the AH-56, Sikorsky self-venture developed a simplified AAFSS that used a number of ex... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2023
1:72 Northrop YF-17 Cobra. In 1965, Northrop began a fighter project, P-530 with a new concept, a pair of Leading Edge Root Extension (LERX) for the main wings that tapered into the fuselage for exceeding attack angles. The shape of LERX looks like a cobra head so it was named Cobra. In 1972, USAF launched the Lightweight Fighter program that called for a small, lightweight, low cost, air superiority day fighter designed for a high... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2025
1:72 Arado Ar-E.581-4. In 1943, Arado began work on series of the Ar E.555 flying wing bomber project. This flying wing configuration was thought to be the best design to fulfill a requirement of high speed, heavy loading and long-range aviation. Due to the design acceptance by the Reichsluftfahrt Ministerium (State Ministry for Aviation) in early 1944, the Arado design team scaled down the same configuration to design a smaller si... Aircraft kits (resin) Catalogue £24.99 Out of Stock
0
Anigrand Craftswork ANIG2026
1:72 Rockwell International XFV-12A U.S. Navy VTOL fighter. In 1972, U.S. Navy issued a request for the proposals of the next generation V/STOL close-support fighter on alternate the McDonnell-Douglas AV-8A. It was requested with supersonic speed capability, and enables to operate from small ships. Rockwell International responded with the 'thrust-augmented wing' design. This concept led to Navy's interest and was fully funded for ... Aircraft kits (resin) Catalogue £47.99 Out of Stock
0
Anigrand Craftswork ANIG2028
1:72 Ling-Temco-Vought XC-142 Largest tilting-wing VTOL transport prototype. In 1950's, many V/STOL aircraft were built and evaluated by the US Military services. Few of the concepts were deemed to have the operational capabilities. Base on these prototypes experiences, the new V/STOL assault transport program was announced. In 1961, a request for proposal of the large cargo airplane was released by Tri-services. Ling-Temco-Vought ... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2029
1:72 Vought XF8U-3 Crusader III. In 1955, with the success of the F8U-1 and -2, Vought started to conceive a more powerful fighter design, the XF8U-3. Although it was similar to the F8Us and carried F8 designation, the aircraft was entirely a new design that installed larger fuselage to accommodate the new powerful J75 engine. The U.S. Navy was interested in the design and signed contract to Vought for five prototypes in competitio... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2031
1:72 Douglas XB-42 Mix-Master. In 1943, the Douglas began a company funded study to a high speed bomber design which was not liked the traditional wing mounting engines. It was an unusual idea to install the two engines within the fuselage driving a pair of propellers mounted at the tail. That can leaving the wing and fuselage clean and free of aerodynamics-reducing protrusions. Douglas submitted an unsolicited proposal to U.S.A.A.... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2032
1:72 Douglas XB-43 Jet-Master. In 1944, as successes of the Reich's jet fighter and bomber projects, the U.S.A.A.F. defined requirement for the first American jet bomber development urgently. Douglas proposed to modify the XB-42 airframe, then repaired the piston engines with a pair of turbojets for saving time and cost. The contact for two prototypes that designated XB-43 was signed, 50 productions program were also planned in the... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2034
1:72 Lockheed XF-90. In 1945, once the war was over, many German swept-wing projects were handed over to American aviation industries. Some studies were reached the same design team which designed Lockheed P-80 in Lockheed (the team later called Skunk Works). In 1946, the USAAF issued requirement for the new generation penetrating fighter which could escort long-range bomber and has ground attack capability. Lockheed submitted thei... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2035
1:72 Martin XB-51. In early 1946, USAAF issued requirement for a new attack bomber in succession to the Douglas A-26. Martin Company proposed its design and won the competition with designation, XA-45. Soon later USAAF revised its requirement for better close-support bombing. Martin accepted the new requirement and was received contract for two prototypes, redesignated XB-51. The first XB-51 made its first flight on Oct 1949. It be... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2039
1:72 North-American YF-93A. In 1946, USAF recognized all the early jet fighters were lacked sufficient range to escort bombers to the target. So the proposal for a penetration fighter were requested. In 1947, North-American responded with the proposal for a revised version of North-American F-86A, which the fuselage size was enlarged for bigger internal fuel tanks to increase its range. The extra fuel increased weight so the more p... Aircraft kits (resin) Catalogue £47.99 - In Stock
3
Anigrand Craftswork ANIG2040
1:72 Dassault Mirage 4000 WAS £51.80. NOW BEING CLEARED!! SAVE 1/3RD!!! In 1976, Dassault-Breguet Aviation announced a private funded 'Delta Super Dassault Mirage' project which was a scaled-up version of the Dassault Mirage 2000 with twin SNECMA engines. Two years later, a mockup which sized comparable to the McDonnell F-15 Eagle and the Sukhoi Su-27 was displayed. It caught Saudi Arabian's interest in serious. In 1979, a demonstr... Aircraft kits (resin) Special Offers £34.55 - In Stock
1
Anigrand Craftswork ANIG2041
1:72 Hughes XF-11. In 1939, Hughes Aircraft used a special wooden structure which strength comparable to steel for a proposal of bomber design, the model D-2. The project interested USAAF because metal material was becoming a scare by the war. In 1942, the D-2 was ordered under an attack aircraft designation XA-37. Later it was considered as a night fighter XP-73. In 1943, the wooden D-2 prototype was lost by fire accident in Hughe... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2042
1:72 Blohm-und-Voss FG.227 flying boat/seaplane. In 1941, after success of the giant BV.222, Blohm-und-Voss was commissioned to design a larger and more capable flying boat, the BV.238. As it was the largest flying boat ever constructed at that time, Blohm-und-Voss engineers could not determined its aerodynamic and hydrodynamic abilities. In order to avoid the risks taken with a full sized BV.238 prototype, it was decided to constr... Aircraft kits (resin) Catalogue £37.99 - In Stock
3
Anigrand Craftswork ANIG2043
1:72 Bell XHSL-1 ASW Helicopter. In 1950, the U.S. Navy launched a competition for a new helicopter to be designed specifically for the Anti-Submarine Warfare role as the existing helicopter inventory could not accomplished the ASW mission. Bell proposed its first and only tandem-rotors design, the Model 61, and won the competition. A contract was signed for three prototypes which were designated XHSL-1. First flight was made in 19... Aircraft kits (resin) Catalogue £37.99 - In Stock
1
Anigrand Craftswork ANIG2044
1:72 Beech XA-38 Grizzly. In 1942, USAAF requested for a new heavy armored ground attack airplane as a replacement of the Douglas A-20 Havoc. Beech Aircraft Corp had already started work on the design of the Model 28 "Destroyer' which specification met to the requirement. So a contract was awarded to Beech for two prototypes that designated XA-38 and re-named 'Grizzly' with competition in Hughes XA-37 (later changed to XF-11). For ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2046
1:72 Convair XB-46. In 1944, with the success of the German jet bomber Ar-234, U.S. war department was aware of aviation advance in the enemy. So a requirement for a new design of the jet bomber which tactical radius could cover 1000-miles was issued. Convair (Consolidated Vultee Aircraft) submitted the Model 109 mockup. It was approved and awarded contract for three prototypes which designated XB-46. Other designs in the competiti... Aircraft kits (resin) Catalogue £87.99 - In Stock
2
Anigrand Craftswork ANIG2048
1:72 Douglas XA2D-1 Skyshark. In June 1945, with the success of the high performance AD Skyraider, Navy asked Douglas to design a new version of the AD with turboprop power, and selected Allison to design the power-plant. Allison proposed to install a pair of nose mounted engines to drive a pair of contra-rotating propellers. In cruise flight, one of the engine and prop could be shut down to increase its flight range. In 1947, two ... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2049
1:72 Convair XP-81 In 1943, USAAF issued a specification for a long-range jet powered fighter which could be flight across the Pacific to escort bombers to Japan. Consolidated Vultee Aircraft (Convair) responded with the new design which was powered by a combination of the turboprop and jet engine units, while Navy was also working on the same theory with the Curtiss XF15C-1 and the Ryan FR-1. The configuration was a nose mounted t... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2050
1:72 Vought XF7U-1 Cutlass. In June 1945, U.S. Navy launched competition for a fighter able to fly at 600 mph high speed. Vought submitted the Model V-346 design which was based from German Arado's tailless fighter documents. Vought's engineers believed that deleting the tailplane would solve aerodynamic problem to increase maximum speed. In June 1946, Navy chose Vought's design as the winner and ordered three prototypes, designate... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2053
1:72 Douglas D-558-3 Skyflash. In early 1950's, a several high-speed flight researches were being proceeded by different agencies, the NACA's hypersonic research, the Air Force's Project 1226 and the Navy's D-558 program. In 1954, Langley team of NACA gathered those similar researches from military services and aerospace industries, combined with the Air Force and Navy to launch the new 'Project 1226' competition. As Navy liked to ... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2056
1:72 McDonnell XP-67 Moonbat. In 1939, USAAF issued a specification 'R-40' for a long-range twin-engine fighter. McDonnell submitted company's first design but was rejected. McDonnell modified the design and resubmitted to USAAF in 1941. This time it was accepted and received order for two prototypes, designated XP-67. The XP-67 was created an unusual looking that the fuselage and the engine nacelles were merged together in order t... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2057
1:72 Republic XF-12 Rainbow. In 1943, USAAF confronted with the problem of photographic information which collecting from the Pacific theatre while U.S. did not had close airfield in Pacific to be able to use photo-reconnaissance aircraft. So USAAF issued a request for a new long-range / high altitude reconnaissance airplane. In March 1944, Republic proposed to modify its civil model, RC-2 to install with the photographic equipment... Aircraft kits (resin) Catalogue £97.99 - In Stock
2
Anigrand Craftswork ANIG2058
1:72 McDonnell XF-88A Voodoo. In 1945, USAAF recognized all the early jet fighters lacked sufficient range to escort bombers to the target. So proposals for a penetration fighter were requested. In 1947, McDonnell submitted its larger-sized McDonnell F2H proposal, and was chosen for two prototypes, designated XF-88 Voodoo. The other designs entered the competition were the Lockheed XF-90 and the North-American YF-93A. In 1948, the ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2059
1:72 Republic XF-84H Thunderscreech. In 1950, Wright Air Development Center of the U.S.A.F. had worked with Curtiss and Hamilton to study the concept of new propeller which could approach supersonic speed to a piston-engine fighter. The engineers of the WADC needed a suitable airframe to test the concept, they selected most powerful Allison turboprop engine at the time, and chose to modify the F-84F for this new role. The concept a... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2061
1:72 Martin XP6M-1/P6M-2 SeaMaster flying boat. In 1951, U.S. Navy issued request to industry for a large seaplane that would be capable of long-range nuclear strike and mining to block Soviet Navy to reach open sea. Martin submitted its Model 275 proposal to the Navy, and was awarded contract for two prototypes which designated XP6M-1 SeaMaster. The first prototype was rolled out in secret in 1954, and made its first flight in 195... Aircraft kits (resin) Catalogue £117.99 - In Stock
2
Anigrand Craftswork ANIG2062
1:72 Platt Le Page XR-1 first U.S.Army helicopter. Aircraft History and Specification. In 1937, two engineers, Laurence LePage and Haviland Platt, traveled to Germany to view the Focke FA-61 tandem-rotor helicopter. There they obtained an option to build the Focke helicopter in U.S., but deteriorating conditions between two governments prevented the deal from going through. After returning to the U.S., they formed Platt LePage Airc... Aircraft kits (resin) Catalogue £37.99 - In Stock
1
Anigrand Craftswork ANIG2063
1:72 Bell YAH-63 attack helicopter. In 1972, the U.S. Army requested proposals for a new Advanced Attack Helicopter (AAH) intended for the all-weather anti-armor role. Preliminary designs were submitted by Boeing, Bell, Hughes, Lockheed and Sikorsky, and in 1973 both Bell and Hughes were awarded contacts for two prototypes. Bell's Model 409 was designated YAH-63, and Hughes' Model 77 became the YAH-64. The YAH-63 was based largely ... Aircraft kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2064
1:72 Curtiss XP-60C / XP-60EIn 1940, Curtiss proposed a initial design for the eventual replacement for the Curtiss P-40 to the USAAF. It was inverted the continental engine to the Curtiss P-40 fuselage and tail assembly. This proposal was accepted and a contract for two prototypes, XP-53 was issued. At the end of 1940, USAAF modified order to install the XP-53 with British Merlin engine. The prototype was redesignated XP-60. Due t... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2065
1:72 Convair Atlas-A/-B/-D/X-11/X-12/XB-65/SM-65B/CGM-16D 1st ICBM. In October 1945, U.S. Army issued supersonic missile requirement to the industries which received many military missiles technical papers from Nazi Germany. In 1946, Convair submitted several proposals and was received funding for the MX-774 rocket study. In 1949, Soviet detonated its first nuclear weapon, U.S.A.F. gave highest priority to Convair to develop a more... Space kits (resin) Catalogue £57.99 - In Stock
1
Anigrand Craftswork ANIG2066
1:72 I.A.I. Lavi. In the end of 1970s, the Israel Defense Force perceived that the IAI Kfir was no solution for future growth. So it announced the requirement for a new combat aircraft which powered by a much more powerful engine and compactable to carry more armament. In February 1980, IAI launched the Lavi program. The development phase was to involve five prototypes, the B-01/-02 was two-seats trainer, and B-03/-04/-05 were sing... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2067
1:72 Douglas C-124A/C Globemaster. After the end of the second World War, the USAAF found the C-74 Globemaster was a very capable and useful aircraft, and began to consider acquiring an improved version proposed by Douglas. It used the same wing, tail and engines from the C-74, but featured a new and enlarged fuselage, as well as clamshell doors in the nose. The result was the Douglas C-124 Globemaster II. The YDouglas C-124 protot... Aircraft kits (resin) Catalogue £147.99 - In Stock
1
Anigrand Craftswork ANIG2068
1:72 North-American XB-28. In 1939, the USAAF issued requirement for a new medium bomber which could operate at high-altitude to avoid attack from ground fire. Martin and North-American responded with the requirement, Martin submitted the Model 182 which was redesigned from the Martin B-26 Marauder, and North-American proposed NA-63 which was based from the North-American B-25 Mitchell. In 1940, North-American's design was chosen t... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2070
1:72 Arado Ar-E.340 B-Bomber. In 1939, the office of the RLM launched the Bomber-B program for a new type of medium bomber capable of carrying a 4,000kg bomb load to any point in the British Isles. Power would be supplied by the Junkers Jumo 9-222 or the Daimler-Benz DB-9-604, both were under development. The contract was issued to the firms of Arado, Dornier, Junkers and Focke-Wulf. The first manufacturer to respond was Arado. The... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2072
1:72 Lockheed X-7 / Aerojet X-8 / Bell X-9 / Lockheed X-17 X-planes missiles set. Lockheed X-7: In 1946, U.S. Air Force called studies for the development of high speed ramjet powered missiles. Lockheed was selected to develop an unmanned testbed which designated X-7. The first flight took place on 1951. The X-7 program was successful. It generated many ramjet datas for the Boeing Bomarc missile defense system and D-21 drone. Aeroj... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2073
1:72 Myasishchev M-17 Stratosfera. In May 1960, when the Lockheed U-2 spy-plane was shot down over Ukraine, American started to use alternative unmanned balloon that prevailing winds would carry it across Soviet territory. The Soviet PVO (air defense forces) found this tread difficult to counter, and ordered Myasishchev to be head of a secret tasked with a high-altitude balloon destroyer aircraft. The result was the M-17 Mystic-A. ... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2074
1:72 Convair XA-41. In 1942, USAAF requested for a single-seat dive bomber design that powered by the new Pratt & Whitney XR4360 engine. The Vultee proposed their Model 90, and was awarded a contract for two prototypes, designated XA-41. After a mockup inspected in March 1943, the USAAF decided that it no longer needed dive bombers and changed the contract for a low-level ground attack aircraft instead. By this time, Vultee had mer... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2075
1:72 Douglas XF6D-1 Missileer. In 1957, the U.S. Navy began to plan a new concept for airborne fleet defense. A large subsonic interceptor with a powerful radar was to be equipped with very long range high speed air-to-air missiles to shoot down approaching Soviet strike aircraft and bombers. In 1958, Bendix and Grumman were selected as contractors for the AAM-N-10 Eagle missile. A year later the Douglas XF6D-1 Missileer design was... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2076
1:72 Curtiss XP-62. In January 1941, the USAAC issued a requirement for a new heavily-armed, high-performance interceptor fighter. The fighter was to be powered by the under developed 2300 hp Wright 'Duplex Cyclone' twin-row radial engine. This was the heaviest engine to be mounted in a fighter, and was the same engine to power the Boeing B-29A Superfortress bomber. Built-in armament was comprised no less than eight 20-mm cannon. C... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2077
1:72 Boeing X-20 Dyna Soar. In 1945, millions of German military documents were confiscated by USAAF. One of the concept was the Sanger aerospace bomber. During post-war years, Bell was selected for the study on space-craft, and named BoMi. In 1956, the Air Force channeled Bell's development to a reconnaissance, bombardment vehicle. A competition for a glider prototype was opened. In 1959, Boeing won the competition, and was contra... Aircraft kits (resin) Catalogue £47.99 - In Stock
3
Anigrand Craftswork ANIG2078
1:72 Martin Titan II/SM-68B ICBM. In 1955, while the first U.S. ICBM Atlas was developed, the U.S.A.F. served a backup in case the Atlas ran fail. It was decided to develop a complete second ICBM system. Martin was awarded a contract for this backup ICBM, designated XB-68/XSM-68 Titan I. Even as the first Titan I were rolling off the assembly line, the Air Force was searching for a way to improve the Titan I after the Soviet Sputni... Space kits (resin) Catalogue £67.99 - In Stock
1
Anigrand Craftswork ANIG2079
1:72 McDonnell Blue Gemini. In 1961, after success of the Mercury spacecraft launch, NASA contracted McDonnell to design a larger two-man Mercury mark II for longer periods in orbit. This bigger spacecraft which soon renamed Gemini that require a larger launch vehicle, a Titan II missile. The Titan II was Air Force missile and naturally required close coordination with the Air Force. The Air Force was interested in the Gemini progr... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2081
1:72 Lockheed C-141A. In 1959, the U.S.A.F. issued a requirement for a jet powered, fast and strategic transport aircraft that would serve as a 'work horse' for rapidly moving U.S. Army troops anywhere in the world. Lockheed responded to the requirement with the Model 300 and was received contract for five test-aircraft to be designated C-141. Although operational testing continue, the Air Force needs due the involvement in South V... Aircraft kits (resin) Catalogue £167.99 - In Stock
2
Anigrand Craftswork ANIG2082
1:72 Lockheed C-141B Starlifter McChord Air Force Base markings. In 1959, the U.S.A.F. issued a requirement for a jet powered, fast and strategic transport aircraft that would serve as a 'work horse' for rapidly moving U.S. Army troops anywhere in the world. Lockheed responded to the requirement with the Model 300 and was received contract for the aircraft to be designated C-141A. In practice, MAC found that the C-141A's cargo hold... Aircraft kits (resin) Catalogue £167.99 Out of Stock
0
Anigrand Craftswork ANIG2083
1:72 Consolidated B-32 Dominator. In 1939, the USAAF issued requirement for a Super bomber which could operate at high-speed, long-range, more bomb load and more defensive armament than the existing Boeing B-17 Flying Fortress and Consolidated B-24. In 1940, the Army issued contracts for preliminary design to four major aircraft companies, which were designated as Boeing XB-29, Lockheed XB-30, Douglas XB-31 and Consolidated XB-32. ... Aircraft kits (resin) Catalogue £117.99 - In Stock
1
Anigrand Craftswork ANIG2084
1:72 XB-48. In 1944, with the success of the German jet bomber Ar.234, USAAF was aware of enemy aviation advances. The war department issued requirement for a new design of the jet bomber which powered either by J35 or J47 engines. The Martin company submitted the Model 223. It was awarded contract for two prototypes which designated XB-48. Other designs in the competition included the North-American XB-45, the Convair XB-46 and th... Aircraft kits (resin) Catalogue £117.99 - In Stock
1
Anigrand Craftswork ANIG2085
1:72 Lockheed AH-56A Cheyenne Attack helicopter to replace AH-1. In 1965, with the growing involvement in Vietnam, the U.S. Army requested proposals for an Advanced Aerial Fire Support System (AAFSS) program intended to establish a technologically advanced attack helicopter. Preliminary designs were submitted by Lockheed and Sikorsky. In 1966, Lockheed's design, AH-56 Cheyenne was selected as the winner. An engineering development ... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2086
1:72 Boeing YUH-61. In 1965, the U.S. Army launched the Utility Tactical Transport Aircraft System (UTTAS) program. The initial specification called for an aircraft able to carry a crew of three and eleven troops with the main goal of replacing the Bell UH-1 Huey. Requests for proposals were issued to the industries in 1972. All the designs proposed in response to the specification were required to use two G.E. turboshaft engines a... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2087
1:72 Handley-Page HP.115. In the late 1950s, the United Kingdom, France, United States and Soviet Union were considering developing supersonic transport. BAC was largely funded by British government on the design called the Type 223. The T.223 was a thin-winged delta shape aircraft but the cost for starting construction was so high. British government required BAC to proceed with small-scale delta wing prototype testing before any ... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2088
1:72 Yakovlev Yak-24 Horse. In 1965, the U.S. Army launched the Utility Tactical Transport Aircraft System (UTTAS) program. The initial specification called for an aircraft able to carry a crew of three and eleven troops with the main goal of replacing the Bell UH-1 Huey. Requests for proposals were issued to the industries in 1972. All the designs proposed in response to the specification were required to use two G.E. turbo-shaft ... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2090
1:72 North-American XA2J-1 Super Savage. Most powerful savage bomber. In 1945, after the first atomic bomb was dropped successfully, the U.S. Navy launched a program for a carrier-based attack aircraft that would be capable of delivering a atomic bomb. The North-American AJ Savage won a Phase 1 competition, a turbo-prop powered aircraft being phase 2, and the phase 3 was a larger jet-powered attack aircraft. In 1947, the Navy reque... Aircraft kits (resin) Catalogue £97.99 - In Stock
1
Anigrand Craftswork ANIG2091
1:72 Fokker V-8 German 5-wing experimental fighter. In February 1917, the British Sopwith triplane began to appear over the Western Front. The Sopwith proved itself superior to the German Albatros biplane fighters. Anthony Fokker responded by his first triplane fighting machine, the Fokker Dr.I Triplane which developed from the V-6 prototypes. Compared to the Albatros and Pfalz fighters, the Dr.1 offered exceptional maneuverability... Aircraft kits (resin) Catalogue £34.99 - In Stock
1
Anigrand Craftswork ANIG2092
1:72 Ilyushin IL-22 In early 1946, the first Soviet designed jet engine, TR-1 was completed. The USSR Council of Ministers issued requirement for a new bomber that would use four of TR-1 jet engines. Ilyushin and Sokhoi were called to begin work on the jet bomber design that resulted in the Il-22 and Sukhoi Su-10. After the Myasishchev OKB was closed in 1945 several key design staff were transferred to Ilyushin and they became invo... Aircraft kits (resin) Catalogue £97.99 - In Stock
2
Anigrand Craftswork ANIG2093
1:72 Lockheed C-140A Jetstar Rapid jet transport Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2094
1:72 McDonnell-Douglas KC-10A Extender. . During the Vietnam War and Arab-Israeli War, the U.S.A.F. C-141 and C-5 were forced to carry a fraction of their maximum payload on direct flights from the continental United States to Asia and Israel. The strategic airlift operations demonstrated the necessity of adequate air-refueling capability. The U.S. Department of Defense concluded that a more advanced tanker was needed. The 'Advance... Aircraft kits (resin) Catalogue £187.99 - In Stock
1
Anigrand Craftswork ANIG2095
1:72 Dassault Mirage G8.01 French nuclear-armed swing wing fighter. In 1964, the French defense ministry requested a development program on variable-sweep wing aircraft for dual land and aircraft carrier use. An order for an experimental prototype was placed to Dassault in 1965. Dassault emerged the variable-sweep aircraft as the two-seat Mirage G4 fighter in 1967, essentially a swept wing version of the Mirage F.2. While the aircr... Aircraft kits (resin) Catalogue £67.99 - In Stock
1
Anigrand Craftswork ANIG2096
1:72 Vickers VC-10K2 British in-flight refueling tanker Aircraft kits (resin) Catalogue £147.99 - In Stock
1
Anigrand Craftswork ANIG2097
1:72 Lockheed XST Have Blue. Stepping stone of the F-117A Nighthawk. In 1975, the USAF and DARPA initiated a XST program to study the concept of a very low observable military aircraft. DARPA penned the requirements for the ATA designs that was a small aircraft about the size of F-15. Northrop and Lockheed were asked to design a prototype. In early 1977, Lockheed won the contract for the construction of two 60-percent scale flyable... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2098
1:72 Boeing C-98 Clipper Allied leaders designate flight. In 1936, Pan Am requested for a flying boat with capability that could fly across the ocean. Boeing's bid of Model 314 Clipper was successful. Pan Am signed a contract for six Clippers. Boeing engineers used the wings of the cancelled XB-15 bomber on the flying boat body. The installation of new Wright Cyclone engines eliminated the lack of power that handicapped the XB-15. ... Aircraft kits (resin) Catalogue £147.99 - In Stock
1
Anigrand Craftswork ANIG2099
1:72 North-American T-39A Sabreliner. In mid-1950s, the USAF launched a Utility Trainer Experimental (UTX) programme for a small, multi-engine jet that would function primarily as a crew trainer. The North-American offered its in house project, model NA-265 to the USAF. Its leading edge slats, swept-back wing and tail gave it a strong resemblance to the F-86 Sabre Jet and the F-100 Super Sabre. The design received the name Sabrelin... Aircraft kits (resin) Catalogue £77.99 - In Stock
2
Anigrand Craftswork ANIG2100
1:72 Boeing YC-14 Advanced medium STOL transport. In 1972, the U.S. Air Force issued the Advanced transport STOL transport program for a new medium airlifter that capable of operations into battle zones with short, temporary airfields. Two proposals were accepted for construction as the Boeing YC-14 and McDonnell-Douglas YC-15 prototypes. The Boeing design for STOL performance was based on the use of a supercritical wing, developed... Aircraft kits (resin) Catalogue £147.99 - In Stock
2
Anigrand Craftswork ANIG2101
1:72 Mitsubishi ATD-X Shinshin Japan stealth fighter demonstrator.At the beginning of the 21st century, JASDF seeking to replace its aging fleet of fighter aircraft, began making overtures to the United States on the topic of purchasing several F-22 Raptors for their own forces. However the U.S. Congress had banned the exporting of the aircraft in order to safeguard secrets of the aircraft's technology such as its extensive use of ... Aircraft kits (resin) Catalogue £77.99 - In Stock
1
Anigrand Craftswork ANIG2103
1:72 CAIC WZ-10 In mid-1990s, the result of combat in the Gulf War made the China military further realise the importance need for attack helicopters. The repeated failures in obtaining foreign attack helicopters reinforced feelings that China military had no choice but to ignore foreign options and develop its own such aircraft. The 602nd Research Institute proposed a dedicated attack helicopter design, designated WZ-10. In 1998, ... Aircraft kits (resin) Catalogue £77.99 - In Stock
2
Anigrand Craftswork ANIG2104
1:72 Douglas C-133 Cargomaster Ballistic missiles carrier. Aircraft kits (resin) Catalogue £187.99 - In Stock
2
Anigrand Craftswork ANIG2105
1:72 Yokosuka H5Y-1 Cherry IJN Type-99 flying boat. In 1934, the Imperial Japanese Navy issued requirement for a twin-engine maritime reconnaissance flying boat, which was intended to match the performance of contemporary four-engine flying boats, while being cheaper to build and easier to maintain. The 11th Naval Air Arsenal at Yokosuka was given the responsibility of design and building two prototypes, these being completed durin... Aircraft kits (resin) Catalogue £117.99 - In Stock
2
Anigrand Craftswork ANIG2106
1:72 Grumman XP-50 Fore-runner of the F7F Tigercat. In 1939, the USAAC issued a contest for a twin-engine heavy interceptor aircraft. Two proposals were accepted for prototypes construction as the Lockheed XP-49 and the Grumman XP-50. The XP-50 was based on the Navy XF5F-1 Skyrocket carrier plane modified for a tricycle landing gear. This twin-motored land plane was of particular interest to the Army because of its air-cooled engin... Aircraft kits (resin) Catalogue £47.99 - In Stock
2
Anigrand Craftswork ANIG2107
1:72 Ilyushin Il-102 Ground attacker competed with Su-25. In 1967, the Soviet Air Forces drew up a specification for a armoured ground attack aircraft. While Sukhoi designed an all-new single seat Su-25, Ilyushin proposed a modified version of their Il-40 of 1953 under the designation Il-42, which unlike the Sukhoi was a two seat aircraft with a remotely controlled rear gun turret. The design was rejected by the Soviet Air Forces, ... Aircraft kits (resin) Catalogue £77.99 - In Stock
2
Anigrand Craftswork ANIG2108
1:72 Mizuno Jinryu Anti-tank suicide glider. In early 1945, Japan's geography were able to predict the Allied invasion plans accurately and thus planned an all-out defensive plan of home islands accordingly. The Imperial Japanese Navy issued requirement for a rocket-powered anti-tank suicide glider to Naval Air Arsenal. The glider was designed to be launched from coastal air bases and caves, and fly towards the Allies LCA or M4 She... Aircraft kits (resin) Catalogue £37.99 - In Stock
2
Anigrand Craftswork ANIG2109
1:72 Lockheed XP-49 Successor to the P-38 Lightning. In 1939, the USAAC issued a contest for a twin-engine heavy interceptor aircraft that intended to use the new Pratt & Whitney X-1800 engine. Two proposals were accepted for prototypes construction as the Lockheed XP-49 and the Grumman XP-50. The XP-49 was very similar in visual appearance to the P-38. In fact the XP-49 was an entirely new design and engineering that featured a pr... Aircraft kits (resin) Catalogue £47.99 - In Stock
1
Anigrand Craftswork ANIG2110
1:72 EWR VJ-101C German tilt-jet VTOL. In the late 1950's, the West Germany issued an requirement for the VTOL fighter, attack and transport aircrafts programme. The idea being that in case of Soviet attack, the VTOL would support dispersal of combat aircraft assets to small and easy concealed operation base. Heinkel submitted the configuration of the tiltjet fighter He.231, attracting interest of the German government. In 1959, He... Aircraft kits (resin) Catalogue £77.99 - In Stock
2
Anigrand Craftswork ANIG2111
1:72 Shenyang J-31 Gyrfalcon Fifth-generation carrier based fighter. In late 1990s, the Chinese People's Liberation Army Air Force launched the stealth fighters program, Western intelligence applied the codename J-XX. The Shenyang Aircraft Corporation was selected to be the contractor for one of the development. In June 2012, photos and camera video clips about a heavily overwrapped possible J-31 prototype being road-transferred on... Aircraft kits (resin) Catalogue £77.99 - In Stock
2
Anigrand Craftswork ANIG2112
1:72 Fairchild XC-120 Packplane Modified C-119 with detachable cargo pod. In 1948, the USAF requested Fairchild to develop a new transport airplane based on the C-119 Flying Boxcar, as the cargo or troops carriers with a better and quicker way to deliver cargo, or an air-deliverable field hospital. Fairchild submitted a proposal for the conversion of the C-119B from the production line into a new designed machine. The aircraft reta... Aircraft kits (resin) Catalogue £147.99 - In Stock
2
Anigrand Craftswork ANIG2113
1:72 Martin M-130 China Clipper. U.S. Navy transport for the Manhattan Project. In early 1930s, Pan Am requested for a flying boat with capability that could fly across the ocean. Martin's bid of Model-130 was successful. In 1934, three M-130 were built as Martin Ocean Transports, but to the public thay were all referred as the China Clipper. On November 1935, the China Clipper flew the first trans-Pacific airmail route. Their rang... Aircraft kits (resin) Catalogue £167.99 - In Stock
2
Anigrand Craftswork ANIG2114
1:72 Sikorsky S-42 flying boat. First of the Flying Clippers. In 1931, Igor Sikorsky laid out plans for a new, larger flying boat based on the earlier Sikorsky S-40. At the time Pan Am requested for a flying boat with which to span the Pacific Ocean and open up routes to the Far East. Both the Glenn Martin Company and Sikorsky responsed, the latter's design being the S-42. For the first time the airline's publicists could rightfull... Aircraft kits (resin) Catalogue £167.99 - In Stock
2
Anigrand Craftswork ANIG2115
1:72 Arado Ar.E.500 Twin-boom attacker project. In 1934, the RLM issued a requirment for a destroyer airplane to several aircraft firms, who were requested to submit proposals of a heavily-armed multi-seat twin-engined aircraft the size of a medium bomber. It would possess a heavy concentration of cannon armament. Arado submitted E.500 project, incorporated an advanced armament concept. This consisted of a pair of turret-mounted 20... Aircraft kits (resin) Catalogue £67.99 - In Stock
2
Anigrand Craftswork ANIG2116
1:72 General Airbrone XCG-16 / Cornelius XFG-1 U.S. gliders combo. XCG-16: In February 1942, Bowlus Sailplanes began the design and construction of flying wing glider. It was an intersting departure from the single-fiselage design which had been common to American gliders. A half-size prototype of the glider was completed later that year. Mr. Bowlous organized General Airborne Co., began a campaign to secue a government contract. I... Aircraft kits (resin) Catalogue £77.99 - In Stock
1
Anigrand Craftswork ANIG2117
1:72 Raytheon Sentinel R.1. In early 1990s, the U.K. Ministry of Defence launched an Airborne Stand-Off Radar (ASTOR) program that was a ground surveillance system designed to provide information about the deployment and movement of enemy forces. The requirement stands for an existing modern, class-leading, large commercial business jet aircraft was to be modified to carry the radar and air-to-ground data links. In 1999, the Raythe... Aircraft kits (resin) Catalogue £147.99 - In Stock
1
Anigrand Craftswork ANIG2118
1:72 Fairchild C-82A Packet World's first twin-boom transport aircraft. During outbreak of War World II, the mainstay of cargo freight operations in USAAF was catered by the C-47 Dakota, C-46 Commando and the C-54 Skymaster but they were built as pre-war civil passenger aircraft, not as dedicated cargo aircraft. In 1941, USAAF issued requirement for a large capacity cargo transport aircraft. Fairchild responded with a submission by... Aircraft kits (resin) Catalogue £147.99 - In Stock
2
Anigrand Craftswork ANIG2119
1:72 VFW-Fokker VAK-191B German vector thrust VTOL. In 1962, the West German government launched an requirement for the new ground attack fighter to replace the Fiat G.91. In the meantime NATO had launched a program for VTOL combat aircrafts. The Germans decided to work on the second VTOL fighter. After consideration of various options, the effort focused on the Focke-Wulf Fw.1262 design. This was further developed in a partnership... Aircraft kits (resin) Catalogue £77.99 - In Stock
3
Anigrand Craftswork ANIG2120
1:72 JASDF ATD-X Shinshin Stealth fighter flying test-bed. 26 resin parts, Clear-resin canopy, decal, Span 126 mm x Length 196 mm. At the beginning of the 21st century, JASDF seeking to replace its aging fleet of fighter aircraft, began making overtures to the United States on the topic of purchasing several F-22 Raptors for their own forces. However the U.S. Congress had banned the exporting of the aircraft in order to safeguard s... Aircraft kits (resin) Catalogue £77.99 - In Stock
1
Anigrand Craftswork ANIG2121
1:72 Kawasaki OH-1 Ninja JGSDF OH-X programme. In late 1980s, the Japan Ground Self-Defence Force (JGSDF) launched the OH-X programme to acquire a new indigenous observation helicopter to replace its Kawasaki license-built OH-6Ds. Design proposals for the OH-X programme were presented by Kawasaki, Fuji and Mitsubishi. Kawasaki's design was selected. The first prototype XOH-1 completed its maiden flight in 1996. Kawasaki handed over... Aircraft kits (resin) Catalogue £77.99 - In Stock
2
Anigrand Craftswork ANIG2122
1:72 Lockheed R6V-1 Constitution U.S. Navy mammoth air transport. In 1942, the U.S. Navy called for a large transport aircraft to improve upon the navy's fleet of flying boats. In the meantime, Lockheed and PanAm began a Model 189 airliner study as a greater / double-decker version of the 049 Constellation. A year later in 1943, the Navy involved the development and ordered two prototypes. It was given designation XR6O-1 Constituti... Aircraft kits (resin) Catalogue £187.99 - In Stock
1
Anigrand Craftswork ANIG2123
1:72 Miles M.30 X Minor. In 1939, F.G. Miles began the design of a large transport aeroplane, the X.2, intended to have the maximum degree of aerodynamic cleanness obtainable. To this end the fuselage was made wide and shallow so that it merged almost imperceptibly into the wing which was fitted with large root fillets. Miles submitted it to the Air Ministry. However the Air Ministry were not interested in civil aircraft or in rese... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2125
1:72 Nakajima B4N-1 Experimental 9-Shi Carrier Attack Aircraft. In April 1932, the Imperial Japanese Navy issued requirement for the new carrier attack aircraft, which was intended to replace the Mitsubishi B2M1 type-89. Both the Mitsubishi and Nakajima were received order for the new aircraft development. Nakajima submitted the specification with tha B4N, that used a biplane configuaretion that had upper gull wings and lower inver... Aircraft kits (resin) Catalogue £57.99 - In Stock
2
Anigrand Craftswork ANIG2126
1:72 McDonnell YC-15 STOL prototype to form the C-17 Globemaster. In 1972, the U.S. Air Force issued the Advanced STOL transport program for a new medium airlifter that capable of operations into battle zones with short, temporary airfields. Two proposals were accepted for construction as the Boeing YC-14 and McDonnell-Douglas YC-15 prototypes. McDonnell Douglas's design incorporated a supercritical wing, the result of NASA researc... Aircraft kits (resin) Catalogue £167.99 - In Stock
2
Anigrand Craftswork ANIG2127
1:72 Northrop YC-125B Raider 3-engined STOL utility transport. As World War II wound down, Northrop looked for a low-cost transport aircraft to serve under-developed airfields for emerging commercial routes. To meet that need, Northrop designed and built the N-23 Pioneer transport at its own expense. In 1948, the U.S. Air Force expressed interest in an aircraft of the same configuration and placed an order with Northrop for 23 airc... Aircraft kits (resin) Catalogue £117.99 - In Stock
2