Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Catalogue



Found 113 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Barracuda Studios BCR48356
1:48 Focke-Wulf Fw-190A-1 thru to Fw-190A-5 and early Fw-190A-6 main wheels (Fw-190A-2 Fw-190A-3 Fw-190A-4] (designed to be used with Airfix, Arii, Dragon, Eduard kits, Hasegawa, Italeri, Monogram, Otaki, Pegasus Hobbies (P) and Tamiya kits] Aircraft wheels (resin) Catalogue £6.66 - In Stock
5
Barracuda Studios BCR48343
1:48 Hawker Sea Fury FB.11 Mainwheels - Diamond Tread. This set contains super detailed resin wheels featuring diamond tread tyres with petite, raised Tyre/Tire beading and data. Separate wheel nuts with and without uplocks are also included. This was a very common tread style for all Sea Furies. Sea Fury wheels were smaller than the 32" diameter wheels used on Fireflies, Tempests and Hornets. (designed to be used with Airfix kits)... Aircraft wheels (resin) Catalogue £6.66 - In Stock
10+
Barracuda Studios BCR48344
1:48 Hawker Sea Fury FB.11 Mainwheels - Block Tread. This set contains super detailed resin wheels featuring staggered block tread tyres with petite, raised Tyre/Tire beading and data. Separate wheel nuts with and without uplocks are also included. This was a very common tread style for all Sea Furies, widely used during the Korean Conflict. Sea Fury wheels were smaller than the 32" diameter wheels used on Fireflies, Tempests and H... Aircraft wheels (resin) Catalogue £6.66 - In Stock
6
Barracuda Studios BCR48347
1:48 Hawker Sea Fury FB.11 Complete Cockpit Set This set contains a complete, super detailed resin cockpit to replace the kit parts. This cockpit is newly tooled, not the old Cooper Details cockpit revised. A complete cockpit tub with accurate consoles (corrects the much too narrow ones in the kits), resin instrument panel, a new seat with naturally draped, molded in belts, stick, gunsight, compass, rudder bar and other small parts... Aircraft detailing sets (resin) Catalogue £15.83 - In Stock
4
Barracuda Studios BC-48361
1:48 North-American P-51D Mustang Cockpit Stencils and Placards. This sheet provides a complete set of stencils and placards for the cockpit of the P-51D. A mass of tiny decals recreate the extensive markings found in the cockpit, from the North-American Data Plates down to the tiny PULL marking on the droptank release handle. Instrument faces are not included, but everything else is. Even the battery and radios behind the seat bul... Aircraft decals (military) Catalogue £5.83 - In Stock
5
Barracuda Studios BC-48375
1:48 Supermarine Spitfire Later Marks Airframe Stencils. This set consists of one set of complete stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin and beautifully printed by Cartograf, and replace the often thick stencils with hard to hide clear film found in all kits of the ... Aircraft decals (military) Catalogue £5.83 - In Stock
10
Barracuda Studios BCR48002
1:48 Fairey Firefly Mk.I cannon barrels (designed to be used with AZ Model and Grand Phoenix kits) This set consists of two complete sets of resin cast cannon barrels to replace the parts in the Grand Phoenix and AZ Models 1:48 Firefly I kit. One set is for the long barrel cannon fitted Firefly, and the other is for the later short barrel aircraft. The kit parts are overscale and crude. These barrels are refined, with drilled out b... Aircraft guns (resin) Catalogue £5.83 - In Stock
3
Barracuda Studios BCR48355
1:48 Focke-Wulf Fw-190A-1 through A-9, F, G Exhausts. This kit contains two complete sets of deeply drilled out, thin walled engine exhaust stubs. Including starboard, port and undercowl exhaust stub banks. Designed for the new tool (2017) Eduard Fw-190 kits, but may be adapted for other 1/48 Fw-190 kits. (designed to be used with Eduard kits)[Fw-190A-4 Fw-190A-5 Fw-190A-7 Fw-190A-8 Fw-190A-9 Fw-190F-8] Aircraft exhausts (resin) Catalogue £6.66 - In Stock
3
Barracuda Studios BCR48289
1:48 Mikoyan MiG-25PD/PDS Foxbat Main and Nose Wheels. This set contains 2 detailed, accurate main and nose wheels fitted to all versions of the Foxbat. The new mainwheels are molded with see-through spokes and separate brake units. Wheels feature detailed hubs, tires/tyres with prototypical tread, fine raised ribbing and tire/tyre data. For the Kitty Hawk and other MiG-25 kits. (designed to be used with Kitty Hawk Model and Revell... Aircraft wheels (resin) Catalogue £9.99 - In Stock
6
Barracuda Studios BCR48290
1:48 Mikoyan MiG-25PD/PDS Contains 2 detailed, accurate exhaust and afterburner assemblies for the Tumansky R-15 engines fitted to interceptor versions of the Foxbat. The kit exhausts are the wrong type for the Interceptor variants. There is a bit of work necessary to install them, but its all described in detail in the instructions, and is a huge detail upgrade for the Kitty Hawk kit. (designed to be used with Kitty Hawk Model kit... Aircraft exhausts (resin) Catalogue £20.83 - In Stock
4
Barracuda Studios BCR48292
1:48 Mikoyan MiG-25PD/PDS Foxbat Nose correction Contains an accurate, detailed forward fuselage and radome to replace the inaccurate nose for the PD/MiG-25PDS versions as supplied in the Kitty Hawk kit. These parts and beautifully scribed and actually fit the kit (crazy talk, I know!) and make a great improvement in the look of the finished model. Master patterns by Mike O'Hare (designed to be used with Kitty Hawk Model kits) Aircraft detailing sets (resin) Catalogue £13.33 - In Stock
4
Barracuda Studios BCR48294
1:48 Mikoyan MiG-21 Radome Upgrade Set. Designed for the superb Eduard MiG-21 series. The kit radome is accurate and well molded. The problem is that you have to paint and install it before you assemble the fuselage halves. Our separate radome and bulkhead allow you to assemble the fuselage without the radome, which is then installed when the model is almost finished. This will allow you to fill and sand the intake seams, and paint... Aircraft detailing sets (resin) Catalogue £5.83 - In Stock
6
Barracuda Studios BCR48304
1:48 Gloster Meteor F.8 Main and Nose Wheel Set. Contains new resin wheels with detailed hubs, accurate tread, tire/tyre data and logos. (designed to be used with Airfix kits) These wheels were also fitted to all later marks. Can be modified to upgrade the Classic Airframes and Aeroclub Meteor kits. Master patterns by Mike O'Hare Aircraft wheels (resin) Catalogue £7.49 - In Stock
5
Barracuda Studios BCR48308
1:48 Boulton-Paul Defiant Mainwheels and Tailwheel. Super detailed, accurate main wheels featuring subtle tire/tyre beading, logos and sharp hub detailing. Set includes separate wheel brushes and greatly refined tailwheel to replace kit parts in new Airfix kit. Can also be fitted to the Classic Airframes kit. (designed to be used with Airfix kits) Aircraft wheels (resin) Catalogue £6.66 - In Stock
4
Barracuda Studios BCR48317
1:48 Supermarine Spitfire 4-slot wheels smooth tyre. This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire/tyre beading & data. The tyre is smooth; by far the most common tire/tyre seen on Spitfires. For Mk VII thru 21 Spitfires operation from grass or dirt runways. Also fitted to some Seafire kits. These wheels are designed to fit the superb Eduard Spitfire Mk.VIII, Mk.IXc/Mk.IXe and Mk.XVI ... Aircraft wheels (resin) Catalogue £6.66 - In Stock
7
Barracuda Studios BCR48318
1:48 Supermarine Spitfire 4-slot block tread (tire style never made before) This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire/tyre beading & data. The tyre is block tread style (not Z-Block style). Fitted to postwar Mk VII thru 21 Spitfires operating from improved runways and carrier decks. Also installed on some Seafire XV, XVII, 45 and 46. These wheels are designed to fit the superb Edu... Aircraft wheels (resin) Catalogue £6.66 - In Stock
6
Barracuda Studios BCR48330
1:48 Curtiss P-40B/P-40C & RAF Tomahawk main wheels with smooth tyres (designed to be used with Airfix, Bronco Models, Monogram and Trumpeter kits) This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite Tyre/Tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for the Airfix, Monogram, Trumpeter and Bronco kits. Aircraft wheels (resin) Catalogue £6.66 - In Stock
4
Barracuda Studios BC-48056
1:48 Westland Welkin Mk.I/II NO INSTRUCTIONS!!! These decals date back to the Cooper Details days and a never completed 1/48 Welkin project. While the kit never materialized, we do have the decals. These decals may be used to replace the kit decals for the Planet Models Welkin Mk.I and Mk. II. These decals are more accurate in color and design than the Planet Models decals. Included are 32, 40, 45, 48 and 50-inch roundels, prototyp... Aircraft decals (military) Catalogue £4.16 - In Stock
1
Barracuda Studios BC-48166
1:48 de Havilland Mosquito Airframe Stencils - Expanded This set is the result of new research based on the superb Mosquito restorations being done by Avspecs in NZ. The external stencils are extensive, and we include new instrument faces for the instrument panel, a few cockpit placards and even some decals for the radios. Printed by Cartograf, these are a real upgrade to all kit stencils in this scale. With complete instructions. ... Aircraft decals (military) Catalogue £6.66 - In Stock
7
Barracuda Studios BCR48195
1:48 Supermarine Spitfire Mk.VIII Snapshot Cockpit Upgrade (designed to be used with Eduard kits) A quick and easy to install upgrade that just gives you just the interesting bits; the "hero" parts! Very little modification of the kit parts is needed to install the 27 tiny parts in this set. Cockpit door, retract quadrant, 2 types of throttle, 2 types of gunsight, two types of seatbelts molded into the seat castings and a host of o... Aircraft detailing sets (resin) Catalogue £12.49 - In Stock
2
Barracuda Studios BCR48197
1:48 Supermarine Spitfire Mk.XVI Snapshot Cockpit Upgrade (designed to be used with Eduard kits) A quick and easy to install upgrade that just gives you just the interesting bits; the "hero" parts! Very little modification of the kit parts is needed to install the 27 tiny parts in this set. Cockpit door, retract quadrant, 2 types of throttle, 2 types of gunsight, two types of seatbelts molded into the seat castings and a host of ot... Aircraft detailing sets (resin) Catalogue £12.49 - In Stock
6
Barracuda Studios BCR48270
1:48 RAF Mid-Late WWII Fighter Pilots. Sculpted by the master of epoxy putty, Mike Good! This European theatre RAF fighter or fighter/bomber pilot is wearing late war flight gear, and is preparing for his next mission by buckling the strap on his flight helmet. Perfect for Hawker Typhoons, Spitfires, Tempests M.IV/Mk.VI, Mosquitos, Meteors, even RAF P-47s and P-51s! Easy assembly and full instructions. (designed to be used with Spe... Figures (resin) Catalogue £10.83 - In Stock
7
Barracuda Studios BCR48218
1:48 de Havilland Hornet/Sea Hornet Drop Tanks. Accurate, super detailed streamlined drop tanks fitted to all marks of the Hornet & Sea Hornet. Tanks are handed as they were on the real aircraft. (designed to be used with Classic Airframes, Dynavector and Trumpeter kits) Aircraft wheels (resin) Catalogue £8.33 - In Stock
5
Barracuda Studios BCR48235
1:48 Rockwell B-1B Lancer Engine Intake Set (designed to be used with Monogram and Revell kits) This set contains a pair of accurate resin cast intake fairings to replace the poorly shaped and basic kit intakes. These new intakes feature the auxiliary intake lips molded in the extended position, as they were frequently seen on the ground. Also included are 4 beautifully detailed intake covers that accurately capture the look of the... Aircraft detailing sets (resin) Catalogue £20.83 - In Stock
5
Barracuda Studios BCR48236
1:48 Rockwell B-1B Lancer Exhausts with Turkey Feathers (designed to be used with Monogram and Revell kits) This set consists of four complete, superdetailed early exhaust assemblies. The first B-1Bs were fitted with turkey feathers covering the exhausts. Early in the program, it was found that vibration problems were splitting and breaking them, so they were removed from all subsequent Bones. This set contains rear engine faces wi... Aircraft exhausts (resin) Catalogue £29.16 - In Stock
5

[1]   «      1   |   2   |   3   |   4   |   5      »      [5]

Search Area Manufacturer Item Type Search

Part Number Scale Keywords Results per Page
Exact Match
Sort by:
Sort Direction:
Added Within last week
last 2 weeks
last month
last 6 months
last year