Cookies are small text files that are placed on your computer by
websites that you visit. They are widely used in order to make
websites work, or work more efficiently, as well as to provide
information to the owners of the site.
Here is a list of cookies this site uses:
Cookie name
Description
existing_user
Stores the email address used to previously log into the site, used to prefill forms like on the reset password screen
authchallenge
Authentication security checks
hcart
Stores the anonymous customer\'s cart token. If items are added to the card while not logged in, if you log in the items will be added to the customer\'s existing cart
hannants
Stores the session information while you remain on the site
pricer
Stores if the export or eu prices is selected on the catalogue page
hidefilter
Stores if the search filter panel is hidden or shown
AWSELB
Stores which server you\'re connected to so to access the same server while you navigate around the site
1:32 LAU-10 5.00" Rocket Launcher (Empty) This set contains two (2) LAU-10 5.00" rocket pods with empty tubes. Tubes are hollow the whole length of the pod.
Designed by Matt Farrow of Shrunk Craft Aircraft detailing sets (resin) Future Releases £0.00 0
1:32 McDonnell F-4 Phantom Centerline Adapter. This set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station. Aircraft detailing sets (resin) Future Releases £0.00 0
1:32 ADU-299 Adapter for LAU-7 This set includes four (4) ADU-299 Adapters. These are used to allow aircraft to carry the LAU-7 missile launcher on stations not normally designed to carry that launcher. Aircraft detailing sets (resin) Future Releases £5.99 0
1:32 Mk-82 500lb Bombs with BSU-49 Fins. This set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs.
This Tail Fin is primarily used by the USAF
It will be necessary to lightly sand the aft section of the bomb body, as well as the forward mating lip of the fin to remove remnants of the print supports, and ensure a tight fit. ... Aircraft detailing sets (resin) Future Releases £14.99 0
1:32 'Death Dealing Deltas' US Marine Corps McDonnell-Douglas F/A-18D's at War
VMFA(AW)-533 BuNo 164959 Operation Iraqi Freedom, Al Asad Air Base, Iraq 2008
VMFA(AW)-224 BuNo 164699 MCAS Iwakuni, Japan 2009
VMFA(AW)-332 BuNo 164870 Operation Deny Flight, Aviano Air Base, Italy 1994 - One of several F/A-18D's from the Moonlighters that participated in the air strike of Udbina Air Field, Croatia. Aircraft decals (military) Catalogue £19.99 5+
1:35 Bell UH-1Y SATCOM Antenna 3D-Printed . This is a two piece 3D-Printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter. (designed to be used with the Academy kits) Aircraft detailing sets (resin) Catalogue £5.99 5+
1:48 McDonnell-Douglas F/A-18A/B/C/D HUD for BuNo's 161353 thru 163782. All NEW design HUD assembly (designed to be used with Hasegawa and Kinetic Model kits) Complete unit is 3D-Printed and comes ready to install after a small modification to the kit parts.
Includes die cut 'glass' in .005 clear styrene Aircraft detailing sets (resin) Catalogue £7.99 4
1:48 McDonnell-Douglas AV-8B Harrier HUD (Head Up Display) This item is 3D-Printed and is ready to install. "Glass" cut in .005 clear styrene also included. Designed to fit the Hasegawa 1/48 AV-8B kits. (designed to be used with Hasegawa kits) Aircraft detailing sets (resin) Catalogue £7.99 5+
1:48 FMV Tail Boom Mod for Bell AH-1Z and UH-1Y (designed to be used with Kitty Hawk Model kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 1
1:48 Mk-83 1000lb bomb with Conical fin (2) This set includes two (2) Mk-83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. 3D-Printed Aircraft detailing sets (resin) Catalogue £11.99 5+
1:48 Bell UH-1Y SATCOM Antenna. This is a two piece 3D-Printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter.(designed to be used with Kitty Hawk Model kits) Simply glue the antenna to the top center of the base, paint and attach to your model. Parts come ready to install with no clean up required. 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 0
1:48 McDonnell-Douglas F/A-18A+/A++/C/D HUD for BuNo's 163985 thru 165532. All NEW design HUD assembly (designed to be used with Hasegawa and Kinetic Model kits) Complete unit is 3D-Printed and comes ready to install after a small modification to the kit parts. Aircraft detailing sets (resin) Catalogue £7.99 5+
1:48 GBU-38 500lb JDAM Set includes two Mk-82/BLU-111 bombs with KMU-572 tail assemblies attached and the nose strake as a separate piece. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 0
1:48 GBU-32 1000lb JDAM Set includes two Mk-83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 2
1:48 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and F/A-18B.
These pylons are correct for F/A-18A/B aircraft with BuNo's 161353 thru 163175.
While the locating holes are designed to fit the Hasegawa series of F/A-18 kits, they will fit all other kits with little to no modification needed. They not only correct the shape of the kit pylons, they provide details unmatched... Aircraft detailing sets (resin) Catalogue £19.99 5+
1:48 contains four correct SUU-63A/A wing pylons and one correct SUU-62A/A centerline pylon for the F/A-18A+, A++, C and D.
These pylons are correct for F/A-18A+ thru D aircraft with BuNo's 163427 thru 163782.
While the locating holes are designed to fit the Hasegawa series of F/A-18 kits, they will fit all other kits with little to no modification needed. They not only correct the shape of the kit pylons, they provide detail... Aircraft detailing sets (resin) Catalogue £19.99 5+
1:48 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D.
These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532 and aircraft upgraded to F/A-18A++ standard. The F/A-18A++ can be easily identified by the installation of the SJU-17 NACES ejection seat, IFF antenna on the nose, GPS dome and swept back upper and lower UHF/VHF antenna, while th... Aircraft detailing sets (resin) Catalogue £19.99 5
1:48 LAU-68F/A APKWS Pod (empty) This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, McDonnell-Douglas AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft. Pods are 3D-Printed and come ready to paint and attach to your model (no casting blocks or supports to remove). 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 0
1:48 GBU-38 Thermally Protected 500lb JDAM Set includes two Mk-82/BLU-111 bombs with the rough ablative coating, two KMU-572 tail assemblies attached and the nose strake as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 3
1:48 McDonnel-Douglas AV-8B Harrier Soft Intake Covers (designed to be used with Hasegawa kits) Designed to be a drop in fit for the Hasegawa AV-8B series of kits. Simply paint and place in intake. 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 4