Flying Leathernecks - Aircraft detailing sets (resin)

Back to manufacturer page

Table/Grid viewToggle View

  • Code Scale Description Type Department Price Stock
  • View Photo
    Flying Leathernecks FL32-2105
    1:32 Boeing F/A-18A/A+ Tail Stiffening Plates Aircraft detailing sets (resin) Catalogue £5.99 5
  • View Photo
    Flying Leathernecks FL32-2109
    1:32 US/NATO inflight refuelling probe tips x 6 Aircraft detailing sets (resin) Catalogue £5.99 5
  • View Photo
    Flying Leathernecks FL32-2113
    1:32 ADU-299 Adapter for LAU-7 This set includes four (4) ADU-299 Adapters. These are used to allow aircraft to carry the LAU-7 missile launcher on stations not normally designed to carry that launcher. Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL32-2126
    1:32 Mk-82 500lb Bombs with BSU-49 Fins. This set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs. This Tail Fin is primarily used by the USAF It will be necessary to lightly sand the aft section of the bomb body, as well as the forward mating lip of the fin to remove remnants of the print supports, and ensure a tight fit. ... Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL32-2132
    1:32 ADU-830/A Adapter for LAU-127 or LAU-7 Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL35-5000
    1:35 FMV Tail Boom Mod for Bell AH-1Z 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 1
  • View Photo
    Flying Leathernecks FL35-5001
    1:35 AN/ALQ-144 3D-Printed Aircraft detailing sets (resin) Catalogue £4.99 2
  • View Photo
    Flying Leathernecks FL35-5002
    1:35 LAU-68F/A APKWS Pod (empty) 3D-Printed Aircraft detailing sets (resin) Catalogue £11.99 3
  • View Photo
    Flying Leathernecks FL35-5003
    1:35 AN/ALE-39 Chaff/Flare buckets (great for diorama) 3D-Printed Aircraft detailing sets (resin) Catalogue £5.99 5
  • View Photo
    Flying Leathernecks FL35-5004
    1:35 AN/ALE-39 Chaff/Flare buckets with flange 3D-Printed 6 buckets Aircraft detailing sets (resin) Catalogue £7.99 4
  • View Photo
    Flying Leathernecks FL35-5005
    1:35 Detailed TSS Turret for Academy Bell AH-1Z 3D-Printed (designed to be used with Academy kits) Aircraft detailing sets (resin) Catalogue £7.99 0
  • View Photo
    Flying Leathernecks FL35-5006
    1:35 LAU-7/A-6 thru LAU-7C/A 1988 to present day 3D-Printed 4 Launchers Aircraft detailing sets (resin) Catalogue £11.99 3
  • View Photo
    Flying Leathernecks FL35-5007
    1:35 Bell UH-1Y SATCOM Antenna 3D-Printed . This is a two piece 3D-Printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter. (designed to be used with the Academy kits) Aircraft detailing sets (resin) Catalogue £5.99 5+
  • View Photo
    Flying Leathernecks FL35-5009
    1:35 XM158A1 2.75" Rocket Launcher 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 5+
  • View Photo
    Flying Leathernecks FL35-5010
    1:35 LAU-10 5.00" Rocket Launcher (Empty) 3D-Printed Aircraft detailing sets (resin) Catalogue £11.99 5+
  • View Photo
    Flying Leathernecks FL48-8000
    1:48 McDonnell-Douglas F/A-18A/B/C/D HUD for BuNo's 161353 thru 163782. All NEW design HUD assembly (designed to be used with Hasegawa and Kinetic Model kits) Complete unit is 3D-Printed and comes ready to install after a small modification to the kit parts. Includes die cut 'glass' in .005 clear styrene Aircraft detailing sets (resin) Catalogue £7.99 4
  • View Photo
    Flying Leathernecks FL48-8001
    1:48 McDonnell-Douglas AV-8B Harrier HUD (Head Up Display) This item is 3D-Printed and is ready to install. "Glass" cut in .005 clear styrene also included. Designed to fit the Hasegawa 1/48 AV-8B kits. (designed to be used with Hasegawa kits) Aircraft detailing sets (resin) Catalogue £7.99 5+
  • View Photo
    Flying Leathernecks FL48-8002
    1:48 FMV Tail Boom Mod for Bell AH-1Z and UH-1Y (designed to be used with Kitty Hawk Model kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 1
  • View Photo
    Flying Leathernecks FL48-8003
    1:48 Mk-83 1000lb bomb with Conical fin (2) This set includes two (2) Mk-83 1000lb bombs, two (2) Conical fins and two (2) each of the following : M904 nose fuzes, Mk-43 TDD and MXU-735 Nose Plugs. The Mk-83 was the weapon of choice for the USN and USMC during Operation Desert Storm and was used extensively throughout the war. 3D-Printed Aircraft detailing sets (resin) Catalogue £11.99 5+
  • View Photo
    Flying Leathernecks FL48-8004
    1:48 Bell AH-1Z 'Viper' TSS Turret (designed to be used with Kitty Hawk Model kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £11.99 5+
  • View Photo
    Flying Leathernecks FL48-8005
    1:48 Mk-83 1000lb bomb with BSU-85 fin (2) 3D-Printed Aircraft detailing sets (resin) Limited Availability £11.99 5+
  • View Photo
    Flying Leathernecks FL48-8006
    1:48 Mk-76 25lb practice bomb 3D-Printed Aircraft detailing sets (resin) Catalogue £4.99 1
  • View Photo
    Flying Leathernecks FL48-8007
    1:48 Mk-77 fire bomb (2) 3D-Printed Aircraft detailing sets (resin) Limited Availability £11.99 4
  • View Photo
    Flying Leathernecks FL48-8008
    1:48 AN/ALQ-144 3D-Printed Aircraft detailing sets (resin) Catalogue £4.99 3
  • View Photo
    Flying Leathernecks FL48-8009
    1:48 Bell UH-1Y SATCOM Antenna. This is a two piece 3D-Printed set of the SATCOM antenna mounted to the top of the main rotor mast on the UH-1Y Helicopter.(designed to be used with Kitty Hawk Model kits) Simply glue the antenna to the top center of the base, paint and attach to your model. Parts come ready to install with no clean up required. 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 0
  • View Photo
    Flying Leathernecks FL48-8010
    1:48 McDonnell-Douglas F/A-18A+/A++/C/D HUD for BuNo's 163985 thru 165532. All NEW design HUD assembly (designed to be used with Hasegawa and Kinetic Model kits) Complete unit is 3D-Printed and comes ready to install after a small modification to the kit parts. Aircraft detailing sets (resin) Catalogue £7.99 5+
  • View Photo
    Flying Leathernecks FL48-8011
    1:48 GBU-38 500lb JDAM Set includes two Mk-82/BLU-111 bombs with KMU-572 tail assemblies attached and the nose strake as a separate piece. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 0
  • View Photo
    Flying Leathernecks FL48-8012
    1:48 GBU-32 1000lb JDAM Set includes two Mk-83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 2
  • View Photo
    Flying Leathernecks FL48-8013
    1:48 contains four correct SUU-63/A wing pylons and one correct SUU-62/A centerline pylon for the F/A-18A and F/A-18B. These pylons are correct for F/A-18A/B aircraft with BuNo's 161353 thru 163175. While the locating holes are designed to fit the Hasegawa series of F/A-18 kits, they will fit all other kits with little to no modification needed. They not only correct the shape of the kit pylons, they provide details unmatched... Aircraft detailing sets (resin) Catalogue £19.99 5+
  • View Photo
    Flying Leathernecks FL48-8014
    1:48 contains four correct SUU-63A/A wing pylons and one correct SUU-62A/A centerline pylon for the F/A-18A+, A++, C and D. These pylons are correct for F/A-18A+ thru D aircraft with BuNo's 163427 thru 163782. While the locating holes are designed to fit the Hasegawa series of F/A-18 kits, they will fit all other kits with little to no modification needed. They not only correct the shape of the kit pylons, they provide detail... Aircraft detailing sets (resin) Catalogue £19.99 5+
  • View Photo
    Flying Leathernecks FL48-8015
    1:48 contains four correct SUU-63C/A wing pylons and one correct SUU-62C/A centerline pylon for the F/A-18A++, C and D. These pylons are correct for F/A-18C and D aircraft with BuNo's 163985 thru 165532 and aircraft upgraded to F/A-18A++ standard. The F/A-18A++ can be easily identified by the installation of the SJU-17 NACES ejection seat, IFF antenna on the nose, GPS dome and swept back upper and lower UHF/VHF antenna, while th... Aircraft detailing sets (resin) Catalogue £19.99 5
  • View Photo
    Flying Leathernecks FL48-8016
    1:48 LAU-68F/A APKWS Pod (empty) This set includes two empty LAU-68F/A pods. The F/A is 11 inches longer than the LAU-68D/A and is used exclusively with the 2.75 APKWS rockets. Pod is used by the F/A-18, McDonnell-Douglas AV-8B, AH-1Z, UH-1Y, A-10, F-16 and a number of other aircraft. Pods are 3D-Printed and come ready to paint and attach to your model (no casting blocks or supports to remove). 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 0
  • View Photo
    Flying Leathernecks FL48-8017
    1:48 GBU-38 Thermally Protected 500lb JDAM Set includes two Mk-82/BLU-111 bombs with the rough ablative coating, two KMU-572 tail assemblies attached and the nose strake as separate pieces. Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs. 3D-Printed Aircraft detailing sets (resin) Catalogue £9.99 3
  • View Photo
    Flying Leathernecks FL48-8018
    1:48 McDonnel-Douglas AV-8B Harrier Soft Intake Covers (designed to be used with Hasegawa kits) Designed to be a drop in fit for the Hasegawa AV-8B series of kits. Simply paint and place in intake. 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 4
  • View Photo
    Flying Leathernecks FL48-8019
    1:48 Mk-82 / BLU-111/B with BSU-33 Fin 3D-Printed 6 bombs Aircraft detailing sets (resin) Catalogue £11.99 5+
  • View Photo
    Flying Leathernecks FL48-8020
    1:48 Mk-82 / BLU-111A/B with BSU-33 Fin - Thermally Protected 3D-Printed 6 bombs Aircraft detailing sets (resin) Catalogue £11.99 5
  • View Photo
    Flying Leathernecks FL48-8021
    1:48 Mk-83 / BLU-110A/B with BSU-85 Fin - Thermally Protected 3D-Printed 2 bombs Aircraft detailing sets (resin) Limited Availability £9.99 5+
  • View Photo
    Flying Leathernecks FL48-8022
    1:48 Mk-83 / BLU-110A/B with Conical Fin - Thermally Protected 3D-Printed 2 bombs Aircraft detailing sets (resin) Catalogue £9.99 5+
  • View Photo
    Flying Leathernecks FL48-8023
    1:48 LGTR (Laser Guided Training Round) 3D-Printed 4 pieces Aircraft detailing sets (resin) Catalogue £9.99 0
  • View Photo
    Flying Leathernecks FL48-8024
    1:48 GBU-32 1000lb JDAM - Thermally Protected 3D-Printed 2 bombs Aircraft detailing sets (resin) Limited Availability £9.99 4
  • View Photo
    Flying Leathernecks FL48-8025
    1:48 McDonnell F-4B Phantom Fin Cap with AN/APR-24 RHAW Antenna (designed to be used with Tamiya kits) 3D-Printed Aircraft detailing sets (resin) Limited Availability £7.99 5+
  • View Photo
    Flying Leathernecks FL48-8026
    1:48 McDonnell F-4B Phantom Early Fin Cap (designed to be used with Tamiya kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 5+
  • View Photo
    Flying Leathernecks FL48-8027
    1:48 McDonnell F-4B Phantom Fin Cap with AN/APR-25 RHAW Antenna (designed to be used with Tamiya kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 5+
  • View Photo
    Flying Leathernecks FL48-8028
    1:48 LAU-7/A (designed to be used with Tamiya kits) McDonnell F-4B Phantom 1958-1968 3D-Printed 4 Launchers (designed be used with Tamiya kits) Aircraft detailing sets (resin) Catalogue £7.99 2
  • View Photo
    Flying Leathernecks FL48-8029
    1:48 LAU-7/A-1 thru /A-3 (designed to be used with Tamiya kits) McDonnell F-4B Phantom 1969-1975 3D-Printed 4 Launchers (designed be used with Tamiya kits) Aircraft detailing sets (resin) Catalogue £7.99 1
  • View Photo
    Flying Leathernecks FL48-8030
    1:48 LAU-7/A-4, /A-5 (designed to be used with Tamiya kits) F-4 Phantom 1976-1987 3D-Printed 4 Launchers Aircraft detailing sets (resin) Catalogue £7.99 5+
  • View Photo
    Flying Leathernecks FL48-8031
    1:48 Grumman EA-6B Corrected Wing Fold Hing Covers for Kinetic 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 2
  • View Photo
    Flying Leathernecks FL48-8032
    1:48 AN/ALE-39 Chaff/Flare buckets (great for diorama) 3D-Printed 6 buckets Aircraft detailing sets (resin) Catalogue £5.99 2

[1]   «      1   |   2   |   3   |   4   |   5      »      [5]