Flying Leathernecks - Aircraft detailing sets (resin)

Table/Grid view

Category

• Catalogue (153)
• Future Releases (36)
• Limited Availability (21)
• Special Offers (6)

Scale

• 1:18 (5)
• 1:32 (72)
• 1:35 (10)
• 1:48 (105)
• 1:72 (24)

Product Type

• Aircraft detailing sets (resin)

Added Within

• last week
• last 2 weeks
• last month
• last 6 months
• last year

• Code Scale Description Type Department Price Stock
• 

  Flying Leathernecks FL48-8097

  1:48 FPU-8/A 330 gallon Fuel Tanks for Lockheed-Martin F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet (designed to be used with Kinetic Model kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0 Backorder
• 

  Flying Leathernecks FL48-8102

  1:48 XM158A1 2.75" Rocket Launcher The Launcher was a seven-tube, reloadable, reusable, repairable 2.75" rocket launcher M158A1 was a variant of the M158 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 5 Add
• 

  Flying Leathernecks FL48-8105

  1:48 Boeing F/A-18A/A+ Hornet Tail Stiffening Plates 3D-Printed Aircraft detailing sets (resin) Catalogue £5.99 5+ Add
• 

  Flying Leathernecks FL48-8106

  1:48 GPS Antenna for Boeing F/A-18, Grumman EA-6B, CH-46E 3D-Printed [Lockheed-Martin F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet] Aircraft detailing sets (resin) Catalogue £4.99 5+ Add
• 

  Flying Leathernecks FL48-8107

  1:48 McDonnell F-4E/F-4G Phantom Belly Strap (designed to be used with Meng Model Kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 5+ Add
• 

  Flying Leathernecks FL48-8108

  1:48 CNU-169/A Travel Pod for USN/USMC McDonnell F-4 Phantom 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 0 Backorder
• 

  Flying Leathernecks FL48-8109

  1:48 US/NATO in flight refuelling probe tips x 6 3D-Printed Aircraft detailing sets (resin) Catalogue £5.99 5+ Add
• 

  Flying Leathernecks FL48-8110

  1:48 McDonnell-Douglas AV-8B Harrier update set (designed to be used with Hasegawa kits) 3D-Printed Aircraft detailing sets (resin) Catalogue £7.99 5+ Add
• 

  Flying Leathernecks FL48-8111

  1:48 McDonnell-Douglas AV-8B Harrier Wing Vortex Generators with Jig. This set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place. Remove VG's from kit wing Apply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the jig from the parts using a sharp blade. 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0 Backorder
• 

  Flying Leathernecks FL48-8112

  1:48 McDonnell-Douglas AV-8B Harrier compressor blades and air temperature probes. This set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra probes are included just in case! 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0 Backorder
• 

  Flying Leathernecks FL48-8115

  1:48 AERO-1D 300gal fuel tank with bobtail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0 Backorder
• 

  Flying Leathernecks FL48-8116

  1:48 AERO-1D 300gal fuel tank with single fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0 Backorder
• 

  Flying Leathernecks FL48-8117

  1:48 AERO-1D 300gal fuel tank with two fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0 Backorder
• 

  Flying Leathernecks FL48-8118

  1:48 AERO-1D 300gal fuel tank with three fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0 Backorder
• 

  Flying Leathernecks FL48-8119

  1:48 AERO-1D 300gal fuel tank with four fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0 Backorder
• 

  Flying Leathernecks FL48-8121

  1:48 AN/AAQ-28 Left Handed LITENING Pod 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0 Backorder
• 

  Flying Leathernecks FL48-8125

  1:48 Lockheed-Martin F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet Tail Jig (designed to be used with Hasegawa kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0 Backorder
• 

  Flying Leathernecks FL48-8126

  1:48 Mk-82 500lb Bombs with BSU-49 Fins. This set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs. This Tail Fin is primarily used by the USAF To allow for maximum detail on the aft end of the tail, this item is supported from the nose of the bomb. It will be necessary to lightly sand the nose section to remove remnants of ... Aircraft detailing sets (resin) Future Releases £9.99 0 Backorder

• Flying Leathernecks FL48-8129

  1:48 AN/ALQ-231(V)1 Intrepid Tiger II EW Pod Aircraft detailing sets (resin) Future Releases £7.99 0 Backorder
• 

  Flying Leathernecks FL48-8130

  1:48 AN/APX-111 IFF Antenna Aircraft detailing sets (resin) Future Releases £5.99 0 Backorder
• 

  Flying Leathernecks FL48-8131

  1:48 'Shark Fin' UHF/VHF Antenna for F/A-18, others Aircraft detailing sets (resin) Future Releases £5.99 0 Backorder
• 

  Flying Leathernecks FL48-8132

  1:48 ADU-830/A Adapter for LAU-127 or LAU-7 Aircraft detailing sets (resin) Future Releases £5.99 0 Backorder
• 

  Flying Leathernecks FL48-8161

  1:48 F/A-18A-D Trailing Edge Flaps - Full Down for Hasegawa Aircraft detailing sets (resin) Future Releases £10.00 0 Backorder
• 

  Flying Leathernecks FL48-8170

  1:48 Paveway IV Laser Guided Bombs Aircraft detailing sets (resin) Future Releases £11.99 0 Backorder

[1]   «      3   |   4   |   5