Flying Leathernecks - Aircraft detailing sets (resin)

Back to manufacturer page

Table/Grid viewToggle View

  • Code Scale Description Type Department Price Stock
  • View Photo
    Flying Leathernecks FL172-2014
    1:72 McDonnell-Douglas AV-8B Harrier II plus corrected radome (designed to be used with Hasegawa kits) Designed by Craig Sargent, this piece corrects the misshaped nose on the Hasegawa 1/72 scale kit. This is a direct replacement for the kit parts with minimal clean up required. Part comes as shown in photo Aircraft detailing sets (resin) Future Releases £0.00 0
  • View Photo
    Flying Leathernecks FL172-2063
    1:72 McDonnell-Douglas AV-8B Harrier II pylons this set includes 10 pylons 3D-Printed There are two options for the outboard wing pylons. One set has the BRU-36 ejector rack for loading ordnance, and the second set has the adapter for use with the LAU-7 (use FL172-2042). Designed for use with the Hasegawa kit, they should work with little modification on other kits. Aircraft detailing sets (resin) Future Releases £9.99 0
  • View Photo
    Flying Leathernecks FL172-2075
    1:72 an/alq-164 decm pod for McDonnell-Douglas AV-8B Harrier II This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm. 3D-Printed Aircraft detailing sets (resin) Future Releases £0.00 0
  • View Photo
    Flying Leathernecks FL172-2090
    1:72 LAU-138 BOL Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL18-1007
    1:18 LAU-7/A-6 Missile Launchers for the McDonnell-Douglas AV-8B Harrier This set includes two (2) LAU-7 launchers and is designed to be used with set FL18-1008 on the Hobbyboss AV-8B kit. Can also be used with the JSI 18th scale F-14 and F/A-18. (designed to be used with Hobby Boss kits) Designed by Richard VanZandt Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL18-1009
    1:18 AN/ALQ-164 DECM Pod for the McDonnell-Douglas AV-8B Harrier This set includes one (1) pod, consisting of three (3) parts. The forward and aft cone, and a hollow main body to reduce weight. To be used with our Harrier Pylon set (designed to be used with Hobby Boss kits) Designed by Craig Sargent Aircraft detailing sets (resin) Future Releases £14.99 0
  • Flying Leathernecks FL32-2053
    1:32 FPU-6/A Oval Fuel Tank for early McDonnell-Douglas F/A-18A/B Hornet (FSD to 90's) (designed to be used with Academy, Hasegawa and Meng Models kits) Aircraft detailing sets (resin) Future Releases £0.00 0
  • Flying Leathernecks FL32-2070
    1:32 Grumman EA-6B /A-6E/E-2C/C-2 Wheels Aircraft detailing sets (resin) Future Releases £0.00 0
  • View Photo
    Flying Leathernecks FL32-2083
    1:32 LAU-10 5.00" Rocket Launcher (Empty) This set contains two (2) LAU-10 5.00" rocket pods with empty tubes. Tubes are hollow the whole length of the pod. Designed by Matt Farrow of Shrunk Craft Aircraft detailing sets (resin) Future Releases £0.00 0
  • View Photo
    Flying Leathernecks FL32-2086
    1:32 McDonnell F-4 Phantom Centerline Adapter. This set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station. Aircraft detailing sets (resin) Future Releases £0.00 0
  • View Photo
    Flying Leathernecks FL32-2113
    1:32 ADU-299 Adapter for LAU-7 This set includes four (4) ADU-299 Adapters. These are used to allow aircraft to carry the LAU-7 missile launcher on stations not normally designed to carry that launcher. Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL32-2126
    1:32 Mk-82 500lb Bombs with BSU-49 Fins. This set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs. This Tail Fin is primarily used by the USAF It will be necessary to lightly sand the aft section of the bomb body, as well as the forward mating lip of the fin to remove remnants of the print supports, and ensure a tight fit. ... Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL32-2132
    1:32 ADU-830/A Adapter for LAU-127 or LAU-7 Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL48-8078
    1:48 McDonnell-Douglas F/A-18C Hornet Nose Landing Gear Doors (designed to be used with Kinetic Model kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £9.99 0
  • View Photo
    Flying Leathernecks FL48-8079
    1:48 Lockheed-Martin F/A-18D Hornet Nose Landing Gear Doors (designed to be used with Kinetic Model kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0
  • View Photo
    Flying Leathernecks FL48-8085
    1:48 ADM-141 TALD (Tactical Air Launched Decoy) Aircraft detailing sets (resin) Future Releases £9.99 0
  • View Photo
    Flying Leathernecks FL48-8091
    1:48 GBU-16 1000lb Laser Guided Bomb This set includes four (4) GBU-16 laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together. ** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fins in the guidance section using a .0292 (#69) drill bit. Use a small tipped sprue cutter or very sharp blade to remove... Aircraft detailing sets (resin) Future Releases £11.99 0
  • View Photo
    Flying Leathernecks FL48-8095
    1:48 GBU-12 500lb Laser Guided Bombs 3D-Printed Aircraft detailing sets (resin) Future Releases £11.99 0
  • View Photo
    Flying Leathernecks FL48-8096
    1:48 GBU-12 500lb Laser Guided Bombs - Thermally Protected 3D-Printed Aircraft detailing sets (resin) Future Releases £11.99 0
  • View Photo
    Flying Leathernecks FL48-8097
    1:48 FPU-8/A 330 gallon Fuel Tanks for Lockheed-Martin F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet (designed to be used with Kinetic Model kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL48-8111
    1:48 McDonnell-Douglas AV-8B Harrier Wing Vortex Generators with Jig. This set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place. Remove VG's from kit wing Apply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the jig from the parts using a sharp blade. 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0
  • View Photo
    Flying Leathernecks FL48-8112
    1:48 McDonnell-Douglas AV-8B Harrier compressor blades and air temperature probes. This set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra probes are included just in case! 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0
  • View Photo
    Flying Leathernecks FL48-8115
    1:48 AERO-1D 300gal fuel tank with bobtail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL48-8116
    1:48 AERO-1D 300gal fuel tank with single fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL48-8117
    1:48 AERO-1D 300gal fuel tank with two fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL48-8118
    1:48 AERO-1D 300gal fuel tank with three fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL48-8119
    1:48 AERO-1D 300gal fuel tank with four fin tail 3D-Printed Aircraft detailing sets (resin) Future Releases £14.99 0
  • View Photo
    Flying Leathernecks FL48-8121
    1:48 AN/AAQ-28 Left Handed LITENING Pod 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0
  • View Photo
    Flying Leathernecks FL48-8125
    1:48 Lockheed-Martin F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet Tail Jig (designed to be used with Hasegawa kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £7.99 0
  • View Photo
    Flying Leathernecks FL48-8126
    1:48 Mk-82 500lb Bombs with BSU-49 Fins. This set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs. This Tail Fin is primarily used by the USAF To allow for maximum detail on the aft end of the tail, this item is supported from the nose of the bomb. It will be necessary to lightly sand the nose section to remove remnants of ... Aircraft detailing sets (resin) Future Releases £9.99 0
  • Flying Leathernecks FL48-8129
    1:48 AN/ALQ-231(V)1 Intrepid Tiger II EW Pod Aircraft detailing sets (resin) Future Releases £7.99 0
  • View Photo
    Flying Leathernecks FL48-8130
    1:48 AN/APX-111 IFF Antenna Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL48-8131
    1:48 'Shark Fin' UHF/VHF Antenna for F/A-18, others Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL48-8132
    1:48 ADU-830/A Adapter for LAU-127 or LAU-7 Aircraft detailing sets (resin) Future Releases £5.99 0
  • View Photo
    Flying Leathernecks FL48-8161
    1:48 F/A-18A-D Trailing Edge Flaps - Full Down for Hasegawa Aircraft detailing sets (resin) Future Releases £10.00 0
  • View Photo
    Flying Leathernecks FL48-8170
    1:48 Paveway IV Laser Guided Bombs Aircraft detailing sets (resin) Future Releases £11.99 0