1:48
Supermarine Spitfire 4-slot wheels smooth tyre. This set contains a pair of detailed 4 slot mainwheels with accurate hub detail,
subtle tire/tyre beading & data. The tyre is smooth; by far the most common tire/tyre seen on Spitfires. For Mk VII thru 21 Spitfires operation from grass or dirt runways. Also fitted to some Seafire kits. These wheels are designed to fit the superb Eduard Spitfire Mk.VIII, Mk.IXc/Mk.IXe and Mk.XVI ...
Aircraft wheels (resin)
Catalogue
£7.99
-
7
1:48
Supermarine Spitfire 4-slot block tread (tire style never made before) This set contains a pair of detailed 4 slot mainwheels with accurate hub detail,
subtle tire/tyre beading & data. The tyre is block tread style (not Z-Block style). Fitted to postwar Mk VII thru 21 Spitfires operating from improved runways and carrier decks. Also installed on some Seafire XV, XVII, 45 and 46. These wheels are designed to fit the superb Edu...
Aircraft wheels (resin)
Catalogue
£7.99
-
10
1:48
Curtiss P-40B/P-40C & RAF Tomahawk main wheels with smooth tyres (designed to be used with Airfix, Bronco Models, Monogram and Trumpeter kits)
This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite Tyre/Tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for the Airfix, Monogram, Trumpeter and Bronco kits.
Aircraft wheels (resin)
Catalogue
£7.99
-
8
1:48
Hawker Sea Fury FB.11 Mainwheels - Diamond Tread. This set contains super detailed resin wheels featuring diamond tread tyres with petite, raised Tyre/Tire beading and data. Separate wheel nuts with and without uplocks are also included. This was a very common tread style for all Sea Furies. Sea Fury wheels were smaller than the 32" diameter wheels used on Fireflies, Tempests and Hornets. (designed to be used with Airfix kits)...
Aircraft wheels (resin)
Catalogue
£7.99
-
6
1:48
Hawker Sea Fury FB.11 Mainwheels - Block Tread. This set contains super detailed resin wheels featuring staggered block tread tyres with petite, raised Tyre/Tire beading and data. Separate wheel nuts with and without uplocks are also included. This was a very common tread style for all Sea Furies, widely used during the Korean Conflict. Sea Fury wheels were smaller than the 32" diameter wheels used on Fireflies, Tempests and H...
Aircraft wheels (resin)
Catalogue
£7.99
-
4
1:48
Hawker Sea Fury FB.11 Complete Cockpit Set This set contains a complete, super detailed resin cockpit to replace the kit parts. This cockpit is newly tooled, not the old Cooper Details cockpit revised. A complete cockpit tub with accurate consoles (corrects the much too narrow ones in the kits), resin instrument panel, a new seat with naturally draped, molded in belts, stick, gunsight, compass, rudder bar and other small parts...
Aircraft detailing sets (resin)
Catalogue
£18.99
-
3
1:48
Hawker Sea Fury FB.11 Gearbay Set This set contains parts to assemble a complete, super detailed resin main landing gear bay to replace the somewhat basic kit gearbay in the Airfix. It has been designed to be installed with a minimum of thinning and modification to the kit wing. It also gives the impression of a thinner lower wing skin and deeper gearbay. May be possible to modify it to fit other kits. (designed to be used wit...
Aircraft detailing sets (resin)
Catalogue
£15.99
-
4
1:48
Hawker Sea Fury FB.11 Engine Front and Spinner Set. This set consists of a new engine front with much improved detail, and a new correctly shaped spinner for the 1/48th Airfix Sea Fury. The kit spinner is too blunt. The parts are designed to be a drop fit replacement for the kit parts, though we highly recommend using this set in conjunction with our Sea Fury Cowling Upgrade Set BCR48350. An easy upgrade that will make your la...
Aircraft detailing sets (resin)
Catalogue
£14.99
-
8
1:48
Hawker Sea Fury FB.11 cowling upgrade (designed to be used with Airfix kits) This set consists of a new closed engine cowling with separate exhausts to replace the somewhat crude kit parts. Our resin cowling has fine recessed panel lines featuring very detailed and accurate cowling fasteners and deeply drilled thin walled separate exhaust banks. A simple to install upgrade that will add visual impact to your model.
Aircraft detailing sets (resin)
Catalogue
£14.99
-
2
1:48
Focke-Wulf Fw-190A-1 through A-9, F, G Exhausts. This kit contains two complete sets of deeply drilled out, thin walled engine exhaust stubs. Including starboard, port and undercowl exhaust stub banks. Designed for the new tool (2017) Eduard Fw-190 kits, but may be adapted for other 1/48 Fw-190 kits. (designed to be used with Eduard kits)[Fw-190A-4 Fw-190A-5 Fw-190A-7 Fw-190A-8 Fw-190A-9 Fw-190F-8]
Aircraft exhausts (resin)
Catalogue
£7.99
-
5
1:48
Focke-Wulf Fw-190A-1 thru to Fw-190A-5 and early Fw-190A-6 main wheels (Fw-190A-2 Fw-190A-3 Fw-190A-4] (designed to be used with Airfix, Arii, Dragon, Eduard kits, Hasegawa, Italeri, Monogram, Otaki, Pegasus Hobbies (P) and Tamiya kits]
Aircraft wheels (resin)
Catalogue
£7.99
-
4
1:48
Messerschmitt Bf-109G-6 Horizontal Tailplanes with Separate Elevators (designed to be used with Tamiya kits) This set contains a new resin horizontal stabiliser with separate elevators. Most 109Gs have elevators hanging in the down position when parked, unless control locks were fitted. Directly replaces the kit tailplanes for the Tamiya Bf-109G-6. A simple upgrade to add life to your Gustav. (designed to be used with Tamiya k...
Aircraft detailing sets (resin)
Catalogue
£9.99
-
10+
1:48
Messerschmitt Bf-109G-6 and Bf-109G-14 Variants Conversion (designed to be used with Tamiya kits) The beautiful Tamiya G-6 has one main problem: it's seriously limited in the number of schemes it can be built with due to a lack of alternate parts. This set supplies you with a tall fin and two different rudders, as well as the compressor bulge fitted to the starboard buele of Erla built G-5s and some G-6s. A battery box cover f...
Aircraft conversions (resin)
Catalogue
£8.99
-
7
1:48
Messerschmitt Bf-109G-6 and Bf-109G-14 Seat with Molded In Belts (designed to be used with Tamiya kits) Contains a new cockpit rear bulkhead, featuring a super detailed seat with accurate and naturally draped molded-in seatbelts. If you struggle with bending and gluing down etched seatbelts, trying to make them look natural, only to have them look a bit two-dimensional, this is a simple and easy to install fix. Minor cutting a...
Aircraft seats (resin)
Catalogue
£7.99
-
4
1:48
Messerschmitt Bf-109G-2 Though Bf-109G-10 Seat with Molded In Belts (designed to be used with Eduard kits)Contains a new cockpit floor and rear bulkhead, featuring a super detailed seat with accurate and naturally draped molded-in seatbelts. If you struggle with bending and gluing down etched seatbelts, trying to make them look natural, only to have them look a bit two-dimensional, this is a simple and easy to install fix. Dir...
Aircraft seats (resin)
Catalogue
£8.99
-
8
1:48
Messerschmitt Bf-109G-5 the to Bf-109G-14 ribbed main tyres and separate ribbed hubs (designed to be used with Academy, Arii, Eduard kits, Fujimi, Hasegawa, Hobby Boss, Hobbycraft, ICM, Italeri, Monogram, Otaki, Matchbox, Revell, Tamiya and Unimodel kits) [Bf-109G-6 Bf-109G-7 Bf-109G-8 Bf-109G-9 Bf-109G-10 Bf-109G-11 Bf-109G-12 Bf-109G-13 Bf-109G-6/G-2]
Aircraft wheels (resin)
Catalogue
£8.99
-
6
1:48
Messerschmitt Bf-109G-5 the to Bf-109G-14 smooth main tyres and separate ribbed hubs. (designed to be used with Academy, Arii, Eduard kits, Fujimi, Hasegawa, Hobby Boss, Hobbycraft, ICM, Italeri, Monogram, Otaki, Matchbox, Revell, Tamiya and Unimodel kits) [Bf-109G-6 Bf-109G-7 Bf-109G-8 Bf-109G-9 Bf-109G-10 Bf-109G-11 Bf-109G-12 Bf-109G-13 Bf-109G-6/G-2]
Aircraft wheels (resin)
Catalogue
£8.99
-
4
1:48
Messerschmitt Bf-109G-5 the to Bf-109G-14 ribbed main tyres and separate plain hubs. W (designed to be used with Academy, Arii, Eduard kits, Fujimi, Hasegawa, Hobby Boss, Hobbycraft, ICM, Italeri, Monogram, Otaki, Matchbox, Revell, Tamiya and Unimodel kits) [Bf-109G-6 Bf-109G-7 Bf-109G-8 Bf-109G-9 Bf-109G-10 Bf-109G-11 Bf-109G-12 Bf-109G-13 Bf-109G-6/G-2]
Aircraft wheels (resin)
Limited Availability
£8.99
-
8
1:48
Messerschmitt Bf-109G-5 the to Bf-109G-14 smooth main tyres and separate plain hubs. (designed to be used with Academy, Arii, Eduard kits, Fujimi, Hasegawa, Hobby Boss, Hobbycraft, ICM, Italeri, Monogram, Otaki, Matchbox, Revell, Tamiya and Unimodel kits) [Bf-109G-6 Bf-109G-7 Bf-109G-8 Bf-109G-9 Bf-109G-10 Bf-109G-11 Bf-109G-12 Bf-109G-13 Bf-109G-6/G-2]
Aircraft wheels (resin)
Limited Availability
£8.99
-
8
1:48
Messerschmitt Bf-109G-10 and Bf-109K-4 Main wheels (designed to be used with Eduard kits, Fujimi, Hasegawa, Hobbycraft, KA-Models and Revell kits)
Aircraft wheels (resin)
Catalogue
£8.99
-
10
1:48
Messerschmitt Bf-109GK Tall Tailwheel Set. This set contains one accurate and very strong lost wax cast brass tall tail strut and two styles of detailed tailwheels in resin, both smooth and radial tread tire versions. This brass strut will not bend over time like white metal can. Can be fit to all late model Bf-109G/K kits in 1:48 scale. A quick and easy upgrade that will assure no more broken tailwheels. Designed by Gunnar Ja...
Aircraft wheels (resin)
Catalogue
£7.25
-
3
1:48
Focke-Wulf Ta-152H Mainwheels. This set consists of new resin mainwheels for Ta-152H and some later production Ta-152Cs. They feature detailed tires with fine tire beading, logo and data, and accurate hub detail with molded in front hub brake cables. A big and easy detail upgrade for your Trimaster, Dragon or Zokei Mura Ta-152 kits. Designed by Gunnar Jansson.
Aircraft wheels (resin)
Catalogue
£8.99
-
4
1:48
Hawker Tempest Mk.V Seat with Belts. This set contains one accurate, detailed resin seat complete with quilted backpad and naturally draped molded-in late war Sutton quick-release style harness for easy painting. Designed as a drop fit replacement for new tool Eduard kit, but can be easily made to work with older kits as well. (designed to be used with Eduard kits)
Aircraft seats (resin)
Catalogue
£7.99
-
7
1:48
Hawker Tempest Mk.V/Mk.VI Exhausts. This set consists of a pair of accurate, detailed, hollowed out exhaust stacks with mounting
flanges & weld beads. Designed to be a drop fit for new tool Eduard Tempest Mks V and VI kits. Can be modified to fit other Tempest kits. A simple and very visible upgrade. (designed to be used with Eduard kits)
Aircraft exhausts (resin)
Catalogue
£6.99
-
6
1:48
Hawker Tempest Mk.V Corrected de Havilland Spinner. This set contains a new detailed de Havilland 4 blade spinner with smaller & accurately shaped blade openings to replace the kit spinner in the Series I and Series II kits. new tool Eduard Tempest V. Can be modified for use on other other Tempest and Typhoon kits. (designed to be used with Eduard kits)
Aircraft detailing sets (resin)
Catalogue
£8.99
-
10