Hannants News Feed Subscribe To This Search | Create Search Alert Create Search Notification

Search Results



Found 369 results
| View per page
Refine your search
Manufacturer & Catalogue No ASC DESC Scale ASC DESC Description ASC DESC Type ASC DESC Department ASC DESC Price ASC DESC Watch Stock ASC DESC Buy
Flying Leathernecks FL172-2014
1:72 McDonnell-Douglas AV-8B Harrier II plus corrected radome (designed to be used with Hasegawa kits) Designed by Craig Sargent, this piece corrects the misshaped nose on the Hasegawa 1/72 scale kit. This is a direct replacement for the kit parts with minimal clean up required. Part comes as shown in photo Aircraft detailing sets (resin) Future Releases £TBA Out of Stock
0
Flying Leathernecks FL172-2075
1:72 an/alq-164 decm pod for McDonnell-Douglas AV-8B Harrier II This set contains one (1) pod. The AN/ALQ-164 Defensive Electronic Countermeasures (DECM) Pod was used frequently by the US Marine Corps AV-8B Harriers during Operation Desert Storm. 3D-Printed Aircraft detailing sets (resin) Future Releases £TBA Out of Stock
0
Flying Leathernecks FL48-8112
1:48 McDonnell-Douglas AV-8B Harrier compressor blades and air temperature probes. This set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra probes are included just in case! 3D-Printed Aircraft detailing sets (resin) Future Releases £6.66
£5.99 		Out of Stock
0
Flying Leathernecks FL172-2063
1:72 McDonnell-Douglas AV-8B Harrier II pylons this set includes 10 pylons 3D-Printed There are two options for the outboard wing pylons. One set has the BRU-36 ejector rack for loading ordnance, and the second set has the adapter for use with the LAU-7 (use FL172-2042). Designed for use with the Hasegawa kit, they should work with little modification on other kits. Aircraft detailing sets (resin) Future Releases £8.32 Out of Stock
0
Flying Leathernecks FL48017
1:48 Lockheed-Martin F-35B/C Leatherneck Lightnings The first of several new sheets covering the F-35B/C in Marine Corps service, including two of the first Bravos to see combat with VMFA-211 in support of Operation Inherent Resolve. Designed to fit the new Italeri kit and printed by Microscale in the US. Markings for 10 aircraft with maintenance data for 2 aircraft. Aircraft decals (military) Future Releases £16.66
£14.99 		Out of Stock
0
Flying Leathernecks FL48-8170
1:48 Paveway IV Laser Guided Bombs Aircraft detailing sets (resin) Future Releases £9.99 Out of Stock
0
Flying Leathernecks FL48023
1:48 Leatherneck Legacy Hornets - sized(designed to be used with Hasegawa kits) US Marine Corp McDonnell-Douglas F/A-18A F/A-18C F/A-18D [McDonnell-Douglas] Aircraft decals (military) Future Releases £16.66
£14.99 		Out of Stock
0
Flying Leathernecks FLV48011
1:48 Aermacchi M-346 canopy detonation cord (designer to be used with Kinetic Model kits) Aircraft detailing sets (vinyl) Catalogue £4.16 Out of Stock
0
Flying Leathernecks FLV35001
1:35 Bell AH-1Z TSS windows. Cut in blue and yellow holographic vinyl to replicate and correct the FLIR/TV windows on the Academy kit. Also included in our decal sheet, FL35001 Marine Skid Kid Zulus (designed to be used with Academy kits) Aircraft paint masks (self adhesive) Catalogue £4.16 Out of Stock
0
Flying Leathernecks FL72003
1:72 Marine Aviation Combat Element II Aircraft decals (military) Future Releases £12.49 Out of Stock
0
Flying Leathernecks FL48-8111
1:48 McDonnell-Douglas AV-8B Harrier Wing Vortex Generators with Jig. This set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place. Remove VG's from kit wing Apply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the jig from the parts using a sharp blade. 3D-Printed Aircraft detailing sets (resin) Future Releases £6.66
£5.99 		Out of Stock
0
Flying Leathernecks FL48-8114
1:48 Boeing f/a-18e/f/a-18f, ea-18g boarding ladder. This one piece boarding ladder is designed to fit both the Meng and Hasegawa Super Hornet / Growler kits. May also work with the Revell and Italeri kits, with possible modifications to kit needed. 3D-Printed Designed by Richard VanZandt of Flightline Resin, item comes as shown in the photo. Diorama accessories (resin) Future Releases £6.66
£5.99 		Out of Stock
0
Flying Leathernecks FL48-8126
1:48 Mk-82 500lb Bombs with BSU-49 Fins. This set includes six (6) Mk-82 500lb Bombs with BSU-49 Ballute Tail Fins, Six (6) M904 Nose Fuzes, Six (6), DSU-33 Proximity Fuzes and Six (6) USAF Nose Plugs. This Tail Fin is primarily used by the USAF To allow for maximum detail on the aft end of the tail, this item is supported from the nose of the bomb. It will be necessary to lightly sand the nose section to remove remnants of ... Aircraft detailing sets (resin) Future Releases £8.32 Out of Stock
0
Flying Leathernecks FL48-8161
1:48 F/A-18A-D Trailing Edge Flaps - Full Down for Hasegawa Aircraft detailing sets (resin) Future Releases £8.33 Out of Stock
0
Flying Leathernecks FLV32003
1:32 McDonnell-Douglas AV-8B Harrier Canopy Detonation Cord. (designed to be used with Trumpeter kits) Aircraft paint masks (self adhesive) Catalogue £4.99 Out of Stock
0
Flying Leathernecks FL48-8061
1:48 Pitot Tubes for F/A-18A-D, F-14, LTV A-7, F-8, AV-8B. Set of 8 correctly sized and shaped pitot tubes for use on the Legacy F/A-18, F-14, LTV A-7, F-8, AV-8B and several other aircraft that use this style of pitot tube. 3D-Printed and lightly supported for easy removal from block. Aircraft detailing sets (resin) Catalogue £4.99 Out of Stock
0
Flying Leathernecks FL48-8078
1:48 McDonnell-Douglas F/A-18C Hornet Nose Landing Gear Doors (designed to be used with Kinetic Model kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £8.32 Out of Stock
0
Flying Leathernecks FLV48003
1:48 McDonnell-Douglas AV-8B Harrier Canopy Detonation Cord (designed to be used with Hasegawa and Revell kits) Aircraft paint masks (self adhesive) Catalogue £4.16 Out of Stock
0
Flying Leathernecks FL48-8079
1:48 Lockheed-Martin F/A-18D Hornet Nose Landing Gear Doors (designed to be used with Kinetic Model kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £6.66 Out of Stock
0
Flying Leathernecks FL48-8125
1:48 Lockheed-Martin F/A-18A/F/A-18B/F/A-18C/F/A-18D Hornet Tail Jig (designed to be used with Hasegawa kits) 3D-Printed Aircraft detailing sets (resin) Future Releases £6.66 Out of Stock
0
Flying Leathernecks FL48-8131
1:48 'Shark Fin' UHF/VHF Antenna for F/A-18, others Aircraft detailing sets (resin) Future Releases £4.99 Out of Stock
0
Flying Leathernecks FLM48-6
1:48 Augusta-Bell UH-1N Canopy Mask and Airframe Detail set. (designed to be used with Italeri kits) Aircraft paint masks (self adhesive) Catalogue £4.16 Out of Stock
0
Flying Leathernecks FLM48-20
1:48 McDonnell-Douglas F/A-18B/D Hornet canopy/wheel mask (designed to be used with Hasegawa kits) Aircraft paint masks (self adhesive) Catalogue £4.16 Out of Stock
0
Flying Leathernecks FLV72003
1:72 McDonnell F-4E/G/S/J(UK) Phantom Belly Strap Vinyl Detail Aircraft detailing sets (vinyl) Catalogue £4.16 Out of Stock
0
Flying Leathernecks FL48-8070
1:48 Grumman EA-6B/A-6E/E-2C/C-2 Intruder Wheels 3D-Printed (designed to be used with Kinetic Models kits) Aircraft wheels (resin) Future Releases £6.66 Out of Stock
0

   1   |   2   |   3   |   4   |   5      »      [15]
| +10

Search Area Manufacturer Item Type Search

Part Number Scale Keywords Results per Page
Exact Match
Sort by:
Sort Direction:
Added Within last week
last 2 weeks
last month
last 6 months
last year